How to configure TAPS to deploy phones with BAT

[reg_cisco]

Hi everybody.

I'd like to know how to configure TAPS in CUCM 8.5 in order to deploy one thousand of phones with BAT.

Shall anybody tell me where I can find a paper to do it step by step?. I'm newby with this service.

Thanks in advance.

[Adam Thompson]

You can find the instructions here:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/bat/8_5_1/bat-851-cm/t18taps.html

HTH,

Adam

**Please remember to rate helpful posts**