09-04-2013 02:05 PM - edited 03-16-2019 07:12 PM
Hello Friends,
I´m working with CUCM 6.1 and route pattern and calls to PSTN. I´m receiving and sending 4 digits from PSTN at MGCP Gw.
MGCP Gw -> PSTN (4digits) OK
Phones -> Phones (4 digits) OK
PSTN -> MGCP Gw (4 digits) NOK
CSS OK
Partitions OK
0.2[^1]XXXXXX part_local_Chicureo (look m3 file)
Any another idea?
09-06-2013 06:44 AM
Carlo,
The CSS is 4 digits,
The similars routern pattern are in diferent partitions, please look the files: m1, m2, m3 y m4.
09-05-2013 07:15 AM
For local numbers try with subscriber format.
09-06-2013 09:51 AM
Hi Claudio,
Can you please share debug mgcp packets of gateway and trace from RTMT as well.
09-06-2013 11:30 AM
Nishant,
172.20.200.20#terminal monitor
172.20.200.20#debug isdn q931
debug isdn q931 is ON.
172.20.200.20#
*Sep 6 18:07:38.259: MGCP Packet sent to 172.20.200.15:2427--->
NTFY 365618475 *@172.20.200.20 MGCP 0.1
X: 0
O:
<---
*Sep 6 18:07:38.259: MGCP Packet received from 172.20.200.15:2427--->
200 365618475
<---
*Sep 6 18:07:52.235: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x1E66
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x0181, '24139496'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '5253'
Plan:ISDN, Type:National
Sending Complete
*Sep 6 18:07:52.243: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x9E66
Cause i = 0x809B - Destination out of order
*Sep 6 18:07:53.259: MGCP Packet sent to 172.20.200.15:2427--->
NTFY 365618476 *@172.20.200.20 MGCP 0.1
X: 0
O:
<---
*Sep 6 18:07:53.259: MGCP Packet received from 172.20.200.15:2427--->
200 365618476
<---
172.20.200.20#terminal no monitor
*Sep 6 18:08:08.259: MGCP Packet sent to 172.20.200.15:2427--->
NTFY 365618477 *@172.20.200.20 MGCP 0.1
X: 0
O:
<---
*Sep 6 18:08:08.259: MGCP Packet received from 172.20.200.15:2427--->
200 365618477
<---
09-06-2013 11:55 AM
This box has been up for a year. Have considered rebooting before troubleshooting further this issue.
It could save you time and energy .
Please rate helpful answers!
09-07-2013 12:20 AM
Hello,
Is it just happening for the single number "5253" or for all number.
I see you have two E1, is the other one acting as a backup for inbound and outbound calls.
If so, can you shut the E1 0/0/0 and see how the calls are working on other controller.
From my understanding it seems like call manager is not responding with CRCX after the Gateway NTFY about the inbound event. Can you try negate mgcp with "no mgcp" and add mgcp back and test the calls.
It would be great if you can pull the detailed CUCM trace and attach here.
Thanks,
Kasi
09-07-2013 03:43 AM
Hi Claudio,
This time your gateway resonded and your gateway is sending different release code "Destination out of Order" to the PSTN.
Have you done any kind of modification?
Also please share the detailed RTMT trace of CUCM as well.
Thanks & Regards,
Nishant Savalia
09-10-2013 08:05 AM
Nishant,
I´ve never used RTMT trace. Please give me steps i Want to do it as soon as possible.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide