<Urgent> BAT VG224 DN issue !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[zhangjianping]

Hi, anyone who can give me a Export txt file for adding VG224 DN or how to BAT this goal.

I have add 10 VG224 into CCM (5.1), now I need to add some DN on VG224 through BAT, but i always failed though I have tried many way .

Could u pls give me some help? or share me the TXT.

Urgent!!!

[Marwan ALshawi]

i think its suported on V6 not 5 !

[t.a.bennett]

I don't believe the BAT import of VG224 DN's is supported on 5 or 6 to be honest (248's are), it sounds like it's going to be a painfully slow manual process.

[Rob Huffman]

Hi Zhang,

Marwan is most correct (nice!)+ 5 points for this Marwan :)

This is not supported in "older" CCM Versions;

CSCeg88823

Symptom:

BAT does not support adding VG224 ports in bulk

Conditions:

This is for all versions of BAT and all current version of Callmanager 3.x, 4.x, 5.x

It is now supported in CCM 6.x

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/6_0_1/t08gwins.html#wp1345635

Hope this helps!

Rob

[Marwan ALshawi]

thanks rob :) and 5 from me for the detailed info as well

[zhangjianping]

Thanks all, each one 5 points.

My god, how can i handle this so many fax manually??????

[alijames · Accepted solution]

Only thing to do avoid doing it all manually is to upgrade to 6. Make sure you go to 6.1.2 though, as there are a number of annoying bugs with VG224/BAT in 6.1.1

Cheers,

Alistair