MCS 7800 series server with call manager 5.1 integrated with UCS 220 server with cucm 10.1

[heba00001]

Hi

i have old cisco MCS 7800 series server with call manager 5.1  , i need to integrated with UCS 220 server with cucm 10.1 , so if any one could help me,  they could be integrated or no ??

thank you ,

regards 

heba 

[Aman Soi]

Hi Heba,

you can either use BAT or can upgrade call manager from 5 to 7 on MCS provided MCS hardware supports.Then build UCS on 7 in offline restore backup from MCS and then, further migrate using PCD but is time consuming.

regds,

aman

[Manish Gogna]

Hi Heba,

Cucm 10.x is not supported on mcs servers, so your mgs server can not be integrated with your 10.x cluster on ucs.

Manish

[j.huizinga]

what do you mean?

Integrate => CM 5.1 and CM 10.1 can communicate with each other? Or do you want to upgrade 5.1 to 10.1?

JH