cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
291
Views
0
Helpful
1
Replies

Simple QoS Question

kylebrogers
Level 4
Level 4

I have a site with a single 2960 switch and a 2811 voie gateway whose FXO card is connected to a couple of POTS lines.  All of their inbound/outbound calls go through the POTS lines and the voice gateway is solely used as a voice gateway.  All data traffic goes through another device.  I have auto qos voip cisco-phone set up on all of the switch ports that connect to phones.  What do I do about the voice gateway?  I need to make sure that all traffic from the voice gateway gets priority just like all traffic from the phones.  Do I set someting on the switchport it's connected to or on the gateway?  What do I set? 

1 Reply 1

James Hawkins
Level 8
Level 8
auto qos voip trust

This is used for trusted connections to other network devices such as your gateway