06-30-2014 08:31 PM - edited 03-16-2019 11:15 PM
I am unable to receive calls to my IP phones when I dial my DIDs. I can make calls out just fine, just not sure why I can't call in. To test I use my cell phone to place a call to my DID (provided my flowroute) and I just get a disconnect tone a few seconds later.
Attached is my current config (FYI I'm new to VOIP and this is a home setup, so any modes that need to be made won't effect anything important)
Cisco 2821 / C2800NM-ADVENTERPRISEK9-M), Version 15.1(4)M8
CME 8.0
Cisco 7975
Flowroute SIP provider
Thank in advance for the help
Solved! Go to Solution.
07-02-2014 08:00 AM
What would that look like? Sorry not to spun up on CME
07-02-2014 07:32 AM
Hi,
Kindly do the below and the other number will work too.
voice translation-rule 12
rule 1 /^19137129524/ /2000/
rule 2 /19137129524/ /2000/
rule 3 /9137129524/ /2000/
rule 4 /^17852465184/ /1002/
rule 5 /17852465184/ /1002/
rule 6 /7852465184/ /1002/
07-02-2014 06:50 AM
Hi jwood,
Also kindly remove the "destination-pattern" command from the dial-peer
dial-peer voice 10 voip
no destination-pattern 17852465184
07-01-2014 02:08 AM
you need
1. incoming translation rule
2. incoming traslation profile
3. incoming dial-peer
post here incomong number and I will do
07-01-2014 07:17 AM
My two numbers are 9137129524 and 7852465184
Thank you
07-02-2014 02:43 AM
voice translation-rule 10
rule 1 /^9137129524/ /1001/
rule 2 /^7852465184/ /1002/
voice translation-profile PROVIDER_in
translate called 10
dial-peer voice 10 voip
translation-profile incoming PROVIDER_in
incoming called-number .
session protocol sipv2
session target dns:sip.flowroute.com
voice-class codec 1
dtmf-relay rtp-nte
no vad
!
07-02-2014 05:25 AM
Awesome thanks, how hard would it be to have the 9137129524 ring both 1001 and 1002?
07-02-2014 05:42 AM
07-02-2014 06:12 AM
please make a small change in translation rule which is posted by ttemirgaliyev (+5) as below and then check
rule 1 /^19137129524/ /1001/
Suresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide