Subscriber installation fail with Call Manager 8.0.3

[vinhnguyen]

I am trying to install Call Manager subscriber

8.0.3 on Cisco MCS 7835 I3 server but it keep on failing with critical error

execution of script

"/usr/local/bin/base_scripts/sd_ifconfig -eth0 -ethtool "autoneg on" ... failed with return code 256

Check licensing

Check connectivity

I tested with hard code the speed and duplex

[Lakshmi Adapala]

Hi,

The error is indicating an issue with the NIC, check the following

1) Did BIOS recognize the NIC card ? erify the LED on the NIC and what are you seeing

2) Is your switch mode configured as access (switchport mode access )

3) If the speed and duplex are hard coded on the switch they must match with the server.

Thanks,

Lakshmi

[Aman Soi]

Hi,

In addition to what Laskhmi has said, do you have Node license for this subscriber installed in PUB , if I go with "Check Licensing" message.

regds,

aman

[bmcghee]

Hi,

      I'm getting the same error when tryint to install 8.0.3 onto a version 10.5 .ova.  Where you ever able to figure this problem out?

Thank you..