10-31-2015 02:34 AM - edited 03-17-2019 04:46 AM
Hi,
some of our Cisco phones in our publisher have a (1) or (2) after them. I 'm thinking this means some sort of copy issue?
Any pointers would be appreciated. Thank you. louis
Solved! Go to Solution.
10-31-2015 06:19 AM
I am assuming you are searrching by directory number, then the number indicates line placement on the phone, i.e. (2) means second DN on the phone.
10-31-2015 06:19 AM
I am assuming you are searrching by directory number, then the number indicates line placement on the phone, i.e. (2) means second DN on the phone.
10-31-2015 12:55 PM
[+5] to Chris, number indication only comes next to the MAC Address of phone when you search by Directory Number. If you will just search by Description or Device Name then only the Device Name will show up without any Line Instance.
Regards
Deepak
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide