cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
397
Views
0
Helpful
5
Replies

Voice IP Telephony

alvinreddy
Level 1
Level 1

Need some expert on the reason for term41.default.load error.

Steps to fix the problem...

5 Replies 5

Jaime Valencia
Cisco Employee
Cisco Employee

You need to provide a lot more information if you want any kind of assistance, what phone model is this?? CUCM?? CME?? What are you trying to do?? etc.

HTH

java

if this helps, please rate

Thanks Jaime for sharing your inputs.

Thanks Shashank for sharing your inputs.

Shashank Mahajan
Cisco Employee
Cisco Employee

If its the Cisco 7941 IP Phone which is showing term41.default.load error, usually this points to a firmware upgrade issue. The proper upgrade sequence should be followed.

For all SCCP firmware upgrades from firmware release versions earlier than 8.3(3) to Version 9.3(1) or later, you must first upgrade your phone firmware to an intermediate version (8.3(3) to 8.5(2)) and then upgrade to 9.3(1).

This can be solved by loading 8.5(2) base firmware on the affected IP Phone and then try upgrading to the Latest Firmware.

alvinreddy
Level 1
Level 1

Thank you so much guys for stating your opinions..!

I manage to resolve the issue by loading the term41 again, it works fine now.

Have a great one.