Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
ALL , As per recommended best practise , would it be advisable to have PE to PE connectivity ( both IGP & ldp connectivity ) for resiliency.Scenario is you have collocated PEs running VRRP with dual homed CEs?? Any comment or Suggestion ?
I have CEs (connecting to the same Service provider network)at two distant branches 30 km apart.Each of the CEs connect to the branch network.We would like to extend the LAN across these locations,also I want HSRP configured between the two CEs.Can t...
I've recently setup GET VPN Cooperative Key Servers, 1 with a priority of 100 and the other a priority of 75. Initially the KS with a priority of 100 comes up as primary, and the other as secondary, as expectedAbout 2 minutes later, the secondary tra...
It's a easy question. can someone tell me if it's true?how does PHP work?we have a topology:---->Packet flow----->PE1------P1------P2------PE2P2 will remove the packet's label and this packet will be labeled with null label.PE2 will perform a routing...
Hi , We are trying to deploy GET(Group Encrypted Tunnel) VPN in our LAB and in the process of that, we were able to setup a key server and 2 group members. In addition to that, we would like to know, whether its possible to configure the key server ...
Hello to all, I'm having problems in understanding how bgp choose one route and discard other based in its SOO, for examplesuppose this examplelook at the network diagram in the link:Figure 1 Network Diagram for SoO Example(BGP per Neighbor SoO Confi...
Hi All I am using Private IPs in my MPLS core as of now and giving VPN services to customers. But now, as per ISP best practices, I want to move to Public IPs inside my MPLS network.Can you all please advise me, what all services will I be able to o...
We have a network block of 10.201.0.0/16 which is divided into two subnet 10.201.0.0/18 and 10.201.192.0/18. We are getting a internet feed for each subnet.10.201.192.0/18 is in global routing table, and 10.201.0.0/18 is in a vrf-lite green.I am thin...
hi all,a newbie question again,can i import/export rte target in a vrf from/to ebgp session, in all my readings i only see samples from import/export with iBGP peeringthanks for answer
hi all,do i need a ES20G module on my 7600 in order to perform VPLS,6VPE mpls and so on...is this module just a 'speeding' module for these fonctionnalities ?(it is very expensive and the license too)Can i implement these features without it ??Does s...
