Network Access Control

Hello community! I am in the midst of deploying 'Microsoft Always On VPN' and I use 'Microsoft Routing and Remote Access' as a VPN server. I am currently trying to get ISE to authenticate and authorize the user tunnel but I am unable to do this for s...

Hello,  I am running Cisco ISE 3.1 with Cisco FTD and Cisco AnyConnect VPN clients for remote users. I would like to configure device profiling with the above setup. Which profiling probes I can use the best to achieve profiling based on devices usin...

I have 2 seperate LDAP/AD domains. I want one AnyConnect group to use one of the servers and anothergroup to use the other LDAP server. All users connect to the 2110 outside interface for AnyConnect  access.How or can this be configured?

Hello, We are currently using AnyConnect that does two factor authentication with Swisscom Mobile ID. Maybe other phone companies have a similar service with another name. Login procedure with that service is as follows: Start AnyConnect and connect ...

Dear community,  While trying to configure Cisco ISE Posture via AnyConnect, I noted that AnyConnect is quarantined from the Antivirus Software which is installed in the host machine. Do you have any idea why this is the case, as I downloaded the pac...

Dear community,  As part of the ISE Posture with AnyConnect, I have imported the Root certificate to all domain hosts via GPO. However, am still getting a Certificate error of untrusted server, when AnyConnect tries to talk to ISE appliance during po...

Dear team, customer has currently fortigate VPN SSL for remote users, so they need to authenticate and authorize based on attributes that are delivered by a NAC solution, maybe VSA attributes. Currently customer doesn't have any NAC, buy they have al...

Hello, We're using AnyConnect 4.10.03104 for remote access VPN via ASA and have to introduce ISE 2.7 posture. We're having issues with the initial client provisioning process where the new endpoint is in an unknown state and the users browser should ...

Hello, We're running ISE 2.7 and want to implement posture compliance checking. Most of our users are running Windows and MacOS which is supported for posture. However, some have to use Linux for development reasons and I am trying to make an excepti...

Hello, We're having loads of fun setting up ISE posturing for securing our AnyConnect VPN remote access. I stumbled across issues with MacOS. Our test environment:AnyConnect 4.10.01075 ... 4.10.03104Compliance Module 4.3.2009.4353ISE 2.7.0.356 patch ...

Hi there, for a customer with a 3rd party VPN solution in place, are there suggestions in how ISE may be able to provide more than just AAA capabilities?   Our customer would like for ISE to be able to check for a registry key, AV installed & Windows...