Network Access Control

After updating our WLCs to 7.4.121 this past weekend, some guest users that are using the ISE central external redirect page are continuously being prompted to re-enter their credentials every 5 minutes or so. Is this related to Cisco bug CSCuf52235?

Hi, I have a problem trying to make external web authentication with an ISE server. I am using the following devices and scenary. Foreign-Anchor WLC Scenary: 1 WLC  5500 as a Foreign 1 WLC 5500 as an Anchor 1 Asa 5505 1 Internet Cisco Router 1 ISE as...

Dears,How to make WLC Receive PoD (Packet of Disconnect) from the RADIUS server to terminate the session and disconnect authenticating clients.Thanks,

Hi all,i have a single SSID with local and flex APs and I am struggling to ensure that local mode APs match AuthZ policy 1 and flex APs match AuthZ policy 2.it seems that upon initial authorisation, the ISE picks AuthZ policy 2 but then during CoA, i...

Hii config radius in the ASA and also i set interim update for sending start stop updates toward radius client . i got a debug command on the asa   but i didn't see any update in the output file.thanksdynamic-access-policy-record DfltAccessPolicyaaa-...

Hi.I want to use encryption for guest access. In order to use the "RADIUS-NAC" in the WLC, you can not use or "Open + MAC" only "WPA + dot1". (Specification of the WLC)  When the "Open + MAC", return from the ISE at the time of the "Web Authenticatio...

vmware 4.1 (or maybe 4.0.1)configured with 2 core minimum freq 3.6Ghz200Gb HD on single physical drive (minimum requirement), no thin provisioningdatastore vmfs 3, 2Mb block size,ethernet : flexible network adapterram 4GbScsi controllersetup......bum...

The ISE External RESTful Service API says that the endpoint registration request should have an Accept header, but the example given uses a Content-Type header.  When I try to use an Accept header, I get a Resource media type exception titled "Wrong ...

Hello Cisco Community,I am using a Cisco 2901 as a Terminal Server with ASYNC Ports. And running Windows NPS for Radius Authentication. I have two users ADMIN and VENDOR. The ADMIN user has full access to all ASYNC ports but what  the VENDOR user to ...

Hello all,I am trying to use RADIUS authentication for Brocade SAN switches, specifically the HP AJ821A switch for the c-class blade enclosure.SAN switch configuration is:aaaconfig --add 10.180.250.222 -conf radius -s sharedsecret -a peap-mschapv2aaa...

Hello :-)I want to implement ISE 1.2.We have a database of mac-addresses and their description (for example the phone with the Mac address, John).When connecting the phone John to a wifi network, WLC checks its mac-address in the database and allows ...