Network Access Control

Good afternoon,MAC 00:0C:29:24:15:72 was entered from CWA through Device Registration by an AD user.  Eventually, this MAC address appeared in the Endpoint database as "VMWare-Device" (which it is) and static assignment FALSE (because it was entered ...

Hi all, Is there a way to send the Cisco ACS secure server report to third party syslog server?Example: for audit purpose, i need the data extract from Monitoring & Reports > Reports >  Catalog >  AAA Protocol I trying by create new remote log target...

Hi All,Deploying multiple PSN's with a  distributed deployment, do all the PSN's have to be in the same domain? I  have 8 set up in one domain, and would like to run a few more through  firewalls and using a different dns domain.Also interested to se...

I am reading up on the ACS VMware appliance installation instructions and am a bit confused on the disk space requirements.  It says 60Gb is required and then goes on to talk about 500GB for the secondary instance.  Hoping someone can help clarify wh...

Hi,we have ACS 5.3 and I don't know why we have a lot of authentication failed of of Username like:"state to down""d state to up""% Authentication failed""l1/0:15, changed state to up"All logs have "async" in the Remote Address fieldThe followng is a...

Hi All,I am trying to obtain guest activity report pertaining to the websites accessed by the guests. I have a standalone ISE deployement (1.1.2) running all personas. I am following the instructions on this document in a way:http://www.cisco.com/en/...

I have a problem where wireless clients at a remote site cannot successfully authenticate through their WLC to my ACS 5.2 (Linux on VM). I have three sites where this authentication is functioning properly; at my fourth site the wireless clients fail...

Existing environment has a dedicated guest controller. Principal would like to retain the guest controller in the DMZ and open ports for CWA to ISE inside the firewall. The question is on configuration of the wireless LAN. Should the foreign controll...

Hi,We have a distributed ACS 5.3 set up - a PR and DR replicating successfully.I've set up 4 remote syslog targets. 2 of them are at the same site as the PR ACS and 2 are at the same site as the DR ACS.The logging collector is set on the PR ACS.The p...

Hi All,I am new to ISE and catching up on things. I am at the profiler and could not clearly understand the two things:- Exception Action. - what is this for and when/how to use it?- static assignment - again, not sure of the real purpose?would appre...