Network Access Control

“Machine and User Connection”I am using Anyconnect Profile Editor, and got problem with making pattern for machine Identity. By default it is set to host/[username],  the problem is with PEAP machine authentication on ACS I see host/username, Is ther...

Hello Guys,I will soon be changing the IP address of my ACS server since i will be moving it to a new VLAN. this ACS is also integrated with Microsoft Active Directory users for authentication of the wireless lan users.my main worry is if i change th...

I am rolling out the Latest 5.3.0.40.6 patched ACS 1121 in a redundant pair mode.   I have build user based auth without issue but am having an issue with Command auth.  once I add command auth to the test router and modify the shell profile and comm...

Hello,I have a question concerning the following szenario:At the customer site we have already implemented ISE 1.1.1 for authenticating wireless guests through a WLC.Additionally we have activated reports for guest-accounting and guest-activity since...

                   Hi All , I ve got this message error on cisco ISE 3315 when my wireless users authenticate . " Dynamic Authorization failed : 11213 No response received from Network Access Device"I have a cisco ISE 3315 and My access-point is a CI...

Can anyone help me with the following ?Under 'Policy Elements/Authorization and Permissions/Network Access/Authorization profiles' I have defined a profile and the following Attribute:Attribute = F5-LTM-User-RoleType = Unsigned Interger 32Value = 300...

I have two ISE PSN nodes that I am importing DigiCert ID certificates on.On one node this worked as it should but on the other I get: 'Private key validation failed: The password is invalid or the private key is improperly protected'This is a SAN cer...

Hi guys,I need to identify the correct patch Version in a Customer ACS for Windows 4.2How can I do this task ?In the about page I cannot find any reference to patchMy Best Regards,    Andre Lomonaco