Network Access Control

We are installing a NAC Solution version 4.9, and we want to know which protocol between 802.1X and SNMP is recommended for  discovery?We have multiple vlans for users and only one authentication vlan. Thanks in advance,Jocelyn

                  Hello cisco folks, Have a technical question I would like to ask. I'm able to setup my 3750e switch to login through a radius server with my company user id and password but would like to be able to set it up that when I log in it d...

                   Hello cisco folks, Have a technical question I would like to ask. I'm able to setup my 3750e switch to login through a radius server with my company user id and password but would like to be able to set it up that when I log in it ...

Hi All, we have deployed L3 in-band scenario for wireless 2 years ago and the solution was working without any problem. we have upgrade wireless controller to 5508, since then, when users login to the first page and certified, and they want to browse...

I have this problem where first time users hit default reject profile because they are not being profiled. They remain unknown until i reconnect. Can this be because of the access point is 1231 converted to lightweight. (it does support change of vla...

good morning Im sure this has been asked before but a quick search has not yielded any exact results so here goes I have anyconnect up and working great on for vpn users using local authentication. Im going over the white papers and seeing a lot of o...

Dear All! Please, explain how to add tacacs custom attribute to ACS 4.2 for Nexus 1000V:shell:roles="network-admin admin-vdc"In the interface configuration I've added new service, service - shell, protocol - tacacs+.In the group settings I've enabled...

I am trying to set up wireless MAB with CWA so that when devices connect to the open guest network they are profiled and if they match a device type (iphone, android) they are allowed access to the internet without AUP or Authentication and all other...

Hello, I'm testing out a scenario where it would be most interesting to be able to provision a windows laptop from connecting to a Guest SSID with it the wireless settings it would need to access a secure SSID where then it would be Posture assessed....

I have recently enabled the SMTP alert function in ACS 5.3. It seems to work well for most of the alerts. One thing though, the active sessions are over limit warning that comes up every so often. I know it is not impacting operations and it is ACS's...

ACS 5.3 monitor and report database can publish to external database，then other application can to use it?now I want to read monitoring and report database,but API of ACS is error.we want to publish database to external database really.Thanks