Network Access Control

Hi,I get the Guest portal page and my credentails authenticate correctly and the device is authenticated using MAB. Then i get this messageThis device has not been registeredYou need to manually configure your deviceYour device configuration is not s...

We have AAA configured as followsaaa new-modelaaa authentication login default local group radiusaaa authentication enable default enableaaa authorization exec default group radius if-authenticatedaaa session-id commonIt was expected that switch will...

Here is the scenarioI have 2 campuses and 2 acs 5.3each campus is somewhat independantI need to setup the followingcampus 1 - acs primaryLDAP store - point to local resource and secondary resource on campus 2Host database for mac filtering - campus 1...

Agent Fails to Initiate Posture AssessmentThe NAC agent is properly installed on a Windoes 7 , IE 9 machine, the certificates from ISE ADM PRI are installed in trustable certificate store in the client machine but is a selfsigned ISE certificate. The...

Hello there, i am evaluating ACS 5.3 with an ASA5505, by using password management in the IPSec tunnel config i am able to authenticate the VPN clients using mschapv2, however, the SSH sessions are authenticated using PAPI have looked for days and da...

HelloIs there a way to configure a switch to change the login prompt if the Radius / TACACS server is not responding? e.g.AAA Server is responding:Username: Password:AAA Server not responding:Fallback_Username:Fallback_Password:       Many thanksAnth...

                   what is the maximum number of AAA clients supported by a single ACS5.3 instance?

Hi , I implemented cisco nac 4.9 in our environment as OOB VG L2 with ADSSO integration ,before ADSSO was implemented  everything had worked correctly  , I  have unauthenticated and access vlan that have diffrenet IP range , when I do not have ADSSO ...

Hi,i want to create a backup from my ACS Server with a custom name.When i create a backup and enter ACSBackup as the filename prefix and backup is run on August 07, 2012 at 20:37 hours, then ACS creates the backup file InstanceName-ACSBackup-120807-2...

Hi Folks,I'm giving ISE 1.1.1 a go in the lab before I deploy it into our live wireless and I've hit a problem with the Android supplicant. I've finally gotten iOS to register and obtain the wireless profile, but when we try with an Android, the dev...