Network Access Control

All, I have an ACS 5.1 and am trying to integrate with windows 2008 R1. The ACS has a valid AD account and indicates that its connected but when I try to list any directory groups my windows IE browser hangs?Any thoughts, thanks in advance for your r...

Hi,Within Cisco ACS version 4.1 how can I restrict a user to only access one device?ThanksDarren

aloha!i am putting the request out there to get some feedback on people's experiences when upgrading from ACS v4.x to v5.2. anything you ran into that blindsided you, etc.... features not working as expected, etc.thanks!ben

Hi,Is there possibility to define service selection rule to match just an accounting request (start/stop)? I tried to use compound condition, but there is no attribute (like Acct-Status-Type or RADIUS packet type code 4) which would allow me to do it...

Hello,I'm planning migration from ACS 3.3 to a new machine, so I'm thinking about new Cisco ISE.I have the following question: ACS 3.3 acts as AAA RADIUS with LDAP repositoriy for wireless deployment, using PEAP-GTC. Is possible, with ISE, to use a d...

Hi,I'm with problems to migrate the ACS 5.1 hardware to  ACS 5.1 vmware. In my infraestructure I have a appliance with ACS 5.1 and I need to migrate to vmware to do HA. I installed vmware as the Cisco ACS recommendations. I made ​​a backup of the ACS...

I have switch 2950 48 port.All its ports configured dot1x.The network is very slow.This switch connect to 6500 (BB) on 1G.what to do?1.Is replacing the 2950 switch? (2960G,3560,3750)2.Will add another one uplink? (lag)3.Does the DOT1X this problem?(N...

I have ACS 5.1.I have created the Identity Group 'Admin' and added 2 users in that, say User1 and User2.How do I permit only User1 to get authenticated when he logins in to the device?There is option to select 'UserName' while creating Service Access...

Hi,I searched cisco documents where as all the documents are having example of ACS 4.0 but i am very keen to know with ACS 5.0 integrated with AD.If anyone could give me document especially with ACS 5.0 , it would be great for me to understand the AC...

HiWhat things is necessary to configure 802.1X EAP PEAP with cisco acs 5.2 + active directory, in the active directory and the cisco acs?cisco acs 5.2 working very well with active directory 2008 r2?? or is not possible work with it.Could you explain...

I am trying to create a user restriction to allow one user to access only two networks (10.192.3.0 and 10.192.5.0) I have range of networks but I want to permit only two networks for limited user and full access for the admins. I know this was possib...

Dear All,I try to configure in both Clean Access Manager and Switch 3560E-24Ps on SNMP Version 2 protocol but I can't make it working together (For CAM and Switch 3560G-48Ps I can do that). Plse give me any suggestion to solve that problem. All confi...

HiI have a strange problem with Cisco ACS 4.2 appliance.The problem is that i had configured the ACS appliance with a remote agent to Integrate with Microsoft active directory and I installed that agent on one of our domain controls and it is working...