Network Access Control

Hi, I'm looking for samples about anyconnect 2.x with PKI authentication through ASA 8.x and ACS 5.2.The CA could be a internal Microsoft CA.thanksrs

I have done a ADSSO config. Following all the steps in the guide with the specifics steps for windows 7 to modify the krb.txt and the strattomcat.I restart services activate the "Enable Agent-Based Windows Single Sign-On with Active Directory (Kerber...

I've recently installed a certificate on my ACS 1113 appliance and in the Admin setup enabled management access over HTTPS. Since then I've not been able to access the GUI console. I have done some troubleshooting and I'm fairly certain that I have a...

Hi,Cisco NAC is connected to the core switch. All the access switches are L2 connected to the core switch and to the clients.The user vlan is 101 and the access vlan is 11. The trusted and untrusted interface of Cisco Access server has same IP.NAC is...

Hello,Since yesterday, we are receiving the following error messages from our primary Cisco ACS server 5.2.26.5. This server is also the log collector for 6 secondary servers.The message says:CISCO SECURE ACS - ALARM NOTIFICATIONAlarm Name: ACS - Sys...

Guys,Please help me,I have 2 Cisco CAM, one is active and other standby. The active is suddenly standby but the CAM Manager can't work.I have checked in event log, there are not error messages for this event.Anyone have a clue ?Best Regards,Rizal Fer...

Hi All ,         I have ACS 1120 ACS appliance running ACS version 5.2.0.26.5 ,authenticating VPN users connecting from internet using radius protocol , we have requirement that VPN user account should be disabled by a specific date , Means user ID s...

Community,I am experiencing an issue where NX-OS on our 5010s is allowing both Local AND TACACS authentication concurrently.  If I don't configure any aaa authorization commands, the locally logged in user has unmitigated access to the device.  Once ...

Tervicko!Does anybody had any problems getting blade-switch authorized correctly?I've made basic tacacs-config in ACS 5.2 (patch 7) and I've got ASA and ASR working correctly. Even Nexus worked when I added attributes found from this forum. But blade...

I am not sure what I am trying to do is possible, so I thought I would pose the question on here.  In ACS 5.3, I would like to use an RSA server and AD to authenticate my network devices.  So when I log into a router or switch I would enter my AD use...

wile I  submit the sh run command i get the below error*** glibc detected *** free(): invalid pointer: 0xbfe0a5cc ***Generating configuration...% Internal error during command executionacs application status as below..ACS role: PRIMARYProcess 'databa...

Experts,My switches are able to successfully authenticate user access against ACS 5.1 via SSH with TACACS+, but I am not able to authenticate via HTTPS with TACACS+.  I don't even get a log in ACS when attempting to authenticate via HTTPS.Here is my ...

Could somebody explain me the technical background, why OpenLDAP never runs with Cisco ACS in combination with a CHAP-based protocol, like MS-Chapv2?