Network Access Control

Hello,I have 3 ACS servers on Windows. I manage with my system admin the way to use certifacte use by the Activite Directory root authority. So, he created for me 3 certificates. I installed certificate on the ACS servers and all of them said certifc...

Hi,I am trying to use Mac authetication bypass for dynamic vlan assignment but I couldn't even authenticate using ACS until now.Here is my config :Interface Config:switchport access vlan 47 switchport mode access dot1x mac-auth-bypass dot1x pae authe...

I have the following scenario:I require to set up a transparent firewall using a Cisco 1841 router with 2 Fast Ethernet interfaces with IOS version 12.4(15)T9 Advanced Security.The project also calls for authenticating users using the ip auth-proxy f...

Hi allRecently install ACS 5.0.0.21.8 and setup ACS for device Administration using TACACS+.Everything works as expected; ACS intergrated correctly with end points, local users can auth onto end point correctly though AAA.Debug on end points shows su...

The online help and PDF doc seem a little vague about the remote database feature....I'm wondering whether it will write the entire View database every time or just the new data?I notice the scheduled jobs is called Export which sounds like it might ...

HiI have an ACS 4.1. Recently my ACS encountered some problems i did a restoration from my server and users are unable to autheniticate. The failed authentication shows "Internal Error". There are no specific explaination on this error code. Did anyo...

I succed to setup a LOCAL-CA-SERVERI would like to generate an Identify certificate from the LOCAL-CA-SERVERso i generated a CSR so as to submit from the the LOCAL-CA-SERVERit's possible ?? what's the way to

HiReally new at ACS I was wondering if this is possible.For a school division using AD, school division would like to use radius 4.2 ACS  for the AD users to access the network wired or wirelss.For rogue users they want them to go to guest default vl...

I'm deploying a new ACS for my network and I've run into a little snag.  The AAA server comes up as 'self' in the 'unassigned' group and I can add all my devices under the 'unassigned' clients and everything works just fine.  The problem is that in p...

Hi, has anybody ever seen the Windows screen on ACS that says, "Appliance is functioning properly. To administer this appliance, please connect via serial port or through a web browser"? I need to upgrade the ACS server but I can't get past this scre...

I have ACS SE 4.2.0.124 in two numbers. Facing replication problem as the SE is showing 127.0.0.1. Need to install ACS for windows in a windows 2000 server and change the ip with the backup and then need to restore to the SE. But where can I get the ...

     hello ,     I have asa 5540 and i have one public ip which i use for internet provide to inside zone of only one system.     now i want to use one public ip and thats use to give internet in my inside zone for more then one system.     how i do ...

Hi,I am using ACS 5.0.0.21 appliance, I have configured the network device and using the ACS local database for authentication.It is working fine.Now I need if ACS fails or client not able to communicate to ACS I should be able to login to the device...

I have made FTP server for backup of ACS, but i m not able to backup due to directory problem. I have given full rights but still getting following error Backup failed due to FTP error. The Server returned 550 E:\ACS BACKUP: The filename directory na...