Network Access Control

Is it possible to authenticate devices (Laptops) by MAC address against ACS without the need for user/RADIUS authentication? For example, have a list of allowed MAC addresses configured on ACS which is used to authenticate wired clients on the networ...

I have a 1113 with Release 4.1(1) Build 23.Is the 4.2 upgrade only available via Proudct Upgrade Tool? I don't see it on Software Download at http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des

I have a ACS 1113 Solution Engine, when I plug into console after BIOS bootup sequence I get Enter CURRENT Password:We don't have the password, can I download the ACS Recovery CD from CCO? I didn't see the recovery image on CCO.

I plug into a RMA ACS 1113 SE and get the following;ThinkVantage Secure Data Disposal Utility 3.Date and Time of execution... 04/09/08 03:03:49:10Command executed.....a:\scrub\scrub3.exe /d=ALL /l=2Return Code.....0I assume the RMA was 'cleaned' but ...

Hello,I am trying to setup RSA RADIUS to authenticate support staff accessing Cisco Switches and Routers by telnet. Does anybody have any exeprience of this RADIUS server and any pointers please?The system is setup and the RADIUS clients have also be...

Hi,Could you please help us to integrate our Cisco ACS 4.1 Solution Engine with Safeword Token Sever 6.0.Thanks in advance

hi,I want to designe the WLAN.but I don't know how to choose the difficult kinds AP. the differents between WLAN and WLAN controllers 4400,2100 .thanks a lot!also,the uses is about the ISR router?

I am configuring an 871 router and have 802.1x enabled. The clients can authenticate properly thru the VPN tunnel. We also will have a printer and IP Phone behind the remote 871 router. They cannot run 802.1x so I have a virtual template with "device...

Hello.I'm looking for a standard schema file to add to a OpenLDAP server to use with a ASA-5510 for VPN.Looking at:http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/extsvr.htmlthe examples are all for Active Directory, so not muc...

Hi allI have 2950-24 and 2950SX-24 switches. I upgraded them to the Latest IOS version availlable on cisco site(12.1(22)EA11). We deployed the mac authentication bypass technology in our organization. The problem is the commands (dot1x mac-auth-bypas...

have ACS appliance, I have made multiiple device group and add different region devices in it. I have redudent ACS running in my enviroment. BUt when i try to add AAA server in my different Device groups i got the error that host already exist. I am ...