Network Access Control

Hi, all.Im sorry my bad english (I have - 7206VXR , NPE-G2 , c7200p-a3jk91s-mz.122-31.SB9.binConfig -SERVICE_403_L4R_TC Password = "cisco", cisco-avpair = "ip:traffic-class=in access-group name ACL_IN_L4R", cisco-avpair = "ip:l4redirect=redirect list...

Does anyone know if it possible to have 2 solution Engines sharing a single, common self signed certificate generated by one of the Solution Engines? I have a certificate, actually two, that are about to expire. I am trying simplify the distribution ...

I have a problem for command authorization in ACS 4.1.I will explain you by an example:I added a command in ACS asinterface & in the arguement: deny gigabitethernetrest of all commands i have permitted.I am not able to execute the command interface g...

Hi expert,I have a problem with the integration between Cisco Secure ACS 4.2 with SUN Java System Directory (LDAP). During the integration, I noticed that user failed to authenticate against LDAP via Cisco Secure ACS. The error message is "Authentica...

Hi from BarcelonaI'm trying to setup Cisco ACS to use PEAP but before that I need to configure a CA on the server. I'm following the procedure found in http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a0080545a...

I have 3 user groups with diff access levels and only one NDG.If I create a separate device group I get an error stating that i cannot use the same AAA server address mentioned in the first group.Can 2 network groups can be created for same AAA?

I have a test Linux box running TAC_Plus and a test switch for AAA. The switch is accessing the TACACS+ server just fine. We change the passwords every time someone is released and we have 250+ devices on our network so a local database would be very...

I have an ACS 4.1 appliance, I have already configured ACS in order to work with certificate. I got the certificate from ACS, I already installed it as the installation guide says . Additionally I configured the card's controller in my PC in order to...

Hi,I'm in the process of staging an upgrade from ACS 3.2(3) to 4.1(4.13).The process to complete the upgrade is ACS 3.2(3) -> 3.3(3) -> 4.1(1) -> 4.1.(4.13).The upgrade steps 3.2(3) -> 3.3(3) and from 3.3(3) to 4.1(1) work reliably, but I am seeing i...

Hi,We get the following error when try to login to Cisco Security Manager. we have tried all options to make it work but went in vein. ""ForbiddenYou don't have permission to access /cwhp/LiaisonServlet on this server.Additionally, a 403 Forbidden er...