Network Access Control

Hi,I am using a 1710 router for VPN client access. Can I use the Microsoft Windows 2000 IAS as a radius server for client authentication.Thanks.Regards,Douglas

Simple problem (yeah right): I have a 4908G-L3 router configured with two actual interfaces (no HSRP) to my networking core and a whole truckload of other interfaces and subinterfaces for my distribution and access layers (all of them HSRP). I have r...

Customer need to implement AAA thru PIX,goal is to Authentified clients from Raduis Server and alsoauthorized these clients to use or no some TCP ports do i need to configure some Virtual Address on PIX inorder to achieve that ? i'm really confused h...

Can the policies created in IAS be used to push to clients that dial up into the AS5350? For instance limiting the amount of time that a user can be connected.

Hi..I got a problem of ACS 3.1replication, each time when server A replicated to sever B, the NAR (network access restriction) that in server B appeared "??? "question mark in AAA client column. for example: "ap340" become "ap340???", As the result, ...

Does anyone know of any known issues when replicating an ACS version 3.0 database to a version 3.1 ACS?

Hello, I am planning to buy the AP for my experiment, and I have some questioins about the features of the Aironet 350 AP.1. If I sent the EAPOL packet with non-standard (i.e. unknow to AP) EAP type, will the AP discard the packet or correctly encapt...

Hi,I'm trying to use radius with ciscoworks LMS. No problem to log in LMS.But with RME, it does not work. When I "Change devices attributes", I have possibility to enter tacacs username/password or local username/password, but no radius authenticatio...

Greetings, I would like to set up aaa authentication for ppp authentication only for my dialup connection. Can this just be done with the: aaa new model aaa authentication ppp default local Username modem password modem Or would require additional aa...

does anyone have a list of cisco vsa or av pairs? thanks! i just want to know whats out there and what i can use. anyways..here is my problem.i just started to setup authorization and now i can't get into my router by telnet. all i did was this. aaa ...

My question has to do with making secure connections to the ACS web interface. I remember thinking I read some time ago that you can set the page up for https:// using MS IIS? I have read info. on the UCP utility and configuring it to be secure, but ...

if i use this command and set it on the microsoft ias (radius) i read some cisco documentation somewhere that said that it would bring you directly into enable mode lvl 15. but it seems that i get lvl 15 priv but i'm still in user mode on my router. ...

HiDoes someone know supports Checkpoint FW 4.1 RSA SecurID user authentication? I have LAN-to-LAN vpn connection between Checkpoint NG and cisco vpn concentrator. It works perfectly, but RSA authentication does not work. So my question is, is it able...

Hi,I believe out there can help me to identified the needs. I have ACS as AAA server, we would like to colloborate with another service provider on offering vpdn access. The SP have an proxy AAA, our company only have ACS 3.0. Do this ACS can support...