Network Access Control

Refer to question : We have to authenticate multiple users for web access via the pix , the PAT on the router in front of the seems to bypass the authentication as only the first session is being authenticated. Will moving the PAT to he PIX itself so...

There are 2 groups of users accessing the as5300. They dial-in to (E1) the same as5300 but on a different number (dnis?). Each group should use different authentication server and different ip pool.

I have 2 ACS3.0 servers configured to authenticate to a Lotus notes LDAPserver. Both are configured the same. Using radtest to check with known account I fail from one but not the other. Using unknown user to ldap and both ldap configurations using s...

is there a way to have a Cisco 3005 VPN Concentrator authenticate users against a Windows 2000 AD running in Native mode?

Does anyone know when we will be able to use ACS with Wireless Access Points for authenticating admin's.

In 11.2 the command aaa authentication local-override exist but it doesn't exist in 12.1(5)

I am using aaa authorization but when the aaa srver goes down I lose access to the router.Can this be fixed ?

Using an AS5300 with built in User lists on router, ( to difficult to transfer authentications to radius as of now) To a Win 2000 Radius server. Is it possible to allow accounting only ,, and if so how to set it up.

I have an issue Cisco's ACS product. It is running on a Sun box(Solaris 5), and we are trying to change the IP address of the box. We can get the Sun box communicating ok(ie ping and telnet work fine), but Radius requests are not being handled. How c...

Is it possible to require authentication via a Radius server in order to access another VLAN? Is so, how do you do it?

I can import users via csutil.exe but is it possible to set a static IP address using csutil? Basically I set up users in batches and some need static IP's so it would be easier doing it all at once. Alternatively could someone suggest an ASP/VBScrip...

How do I configure Radius in the NAS for not double authentication

Just purchased Pix Firewall, It is in our development Lan for the moment until configuration is completed. My question being new to the Pix world is I would like to have my users Authenticate with user name and password for access to the Internet. My...

I am trying to allow my users to reverse telnet to a US Robotics Sportster 56K modem which is connected to the auxilary port of a Cisco 1710. First I want them to authenticate either the local or radius user databases. I have been able to reverse tel...

Where can I change the password for L2TP tunnel authentication on vpn3030.on the other end of L2TP tunnel is 2621. configured vpnd with: l2tp tunnel password cisco.