Network Access Control

I changed the SGT name in ISE, but SGT is not updated in the SGT item on the screen of “IP SGT Static Mapping”. I confirmed that the SGT information was updated in other screens of ISE. Is the setting insufficient? Or is it a bug? 

 We have ASAs with three security contexts. We have one ISE appliance for TACACS+. Our MGMT context and ISE are routed on MGMT network. Our other two contexts are on different networks. How do we point our other two contexts to our ISE appliance via ...

Hi,   I would like to modify the subject and the icon of the Guest Account Expiration Notice email, but cannot find where this can be done.   Thanks for your help. 

I have a Nexus 7k connected to an ISE server for login authentication and the login goes through and I am successfully logged into the 7k however the account that is logged in has no permissions. What am I missing that is preventing the account from ...

I have a new ISE POC going and was testing ISE/dot1x functionality without DHCP snooping. In past deployments the customers have either been open to enabling snooping, or already had it in use.  Before saying it is a hard requirement, I have taken a ...

Does anyone know whether one ISE cluster deployed globally can work well with multiple SMCs for information sharing and endpoint quarantine? 

Hi All, I am facing some challenges in profiling a few endpoints with static IP addresses. 1- HP printers with static IPFrom the radius probe alone the printers were identified as "HP-Device" which will include the HP laptops as well. So I tried to c...

Hi Guys, We recently upgraded our ASA to 9.5.2 to allow us to have a separate routing table for the management interface, and allow us to reach the TACACS server through this interface. We currently have ACS for TACACS. After upgrade, we are no longe...

Hello,I have requirement to allow guest users possibility to select prefered account duration. This option should be visible on guest self-registration form, then forwarded to sponsor for acceptance.I found that there are variables:ui_end_date_time u...

Hi Guys,   We are considering a Hybrid deployment with 4 nodes: 2 x unified PAN+MnT (SNS-3695) and 2 x PSN+SXP (SNS-3595). According to ISE Perf&Scale this deployment could scale up to 10K IP-SGT bindings maximum:      In our case we'll have 20K+ end...

Dear Community, We are running Cisco ISE 2.3 patch 6 and we are facing issues in posture policy. I have created 4 policies for posturing in following sequence. I have attached screenshot.1. Mobile devices ( to exclude mobile devices for posturing )2....