Network Security

Hi Friends, In my ASA 8.4(7)30 HA setup, i do see standby failed when i run show failover in Primary FW (Active) as given below. Primary - Active FW # show failover This host: Primary - Active Other host: Secondary - Failed Secondary - Standby FW # s...

Hello everyone !! Our client is requesting to enable FQDN based ACL's  (mostly because its easy to give a URL instead of multiple ip's for the same URL) but when i researched it looks like this feature has lot of shortcomings like i listed below , co...

Trying to allow traffic from external IPs into the network using certain ports. Requirements are, 555 TCP - Forward traffic to static private IP address (Transmitter) 2001 TCP - Forward traffic to static private IP address (Transmitter) 3000 UDP - Fo...

Hi, I am planning to install a FirePOWER software module to one Production ASA 5525-X. I have read the "Install and Configure a FirePOWER Services Module on an ASA Platform" guide but I am not sure will the any parts of the process interrupt ASA traf...

Hi, Fairly simple setup overall: There is a Traffic Profile with traffic pattern and deviations gathered over time from the DNS sever - graph/data can be seen; Correlation Rule is created for that Traffic Profile. Again - nothing fancy - looking for ...

Hello, is that possible to log any config changes to a Cisco ASA using Syslog ?   if yes, please let me know what level and wat syslog messages shows ?   I have enable informational level, but on my syslog-server nothing is displayed about any config...

Hi, Is there any way to only allow specific port for local network like only http,https and ftp  and block all others? I tried to create a acl for inside interface with inc. traffic for these port but it blocks everything. I have attached screenshot.

I am  testing the firepower (ver. 6.0.0.1-26)  on ASA 5525X (9.5.3). I have access control policy applied with file and malware policies in it which are to block malware. I have an issue where a test a malware file transfer using TFTP isnt detected b...

Dears , 3 questions related to Firesight Virtual Management Center : 1)can i install firesight virtual machine in remote site and Add firepower module that is configured on Local Site via (site-to-site vpn or MPLS) ? 2)is there public virtual Managem...

Hi, (apologize for my broken English) i have 2 ASA5585X with SSP-CX in failover active/stanby with 2 contexts. I want to migrate SSP-CX to SSP-SFR (firepower) without disruption. I change the card in the standby firewall and at the reboot , i have th...

Hi We are just evaluating this product got it installed and can see data.  The deployment instructions advise you can export data either in CSV or PDF, when we click on the export button the only option is PDF, anyone know how to enable CSV? Thanks

Hi, when the cisco release the latest software version? We encountered that it can't block the previous version of Ultrasurf but able to block the latest version (16.x).