In the Guide of ASA 9.6 http://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/general/asa-96-general-config/ha-failover.html#ID-2107-00000379 It is mentioned concerning the Failover license: Failover units do not require the same l...
Hi to all. After replacing old ASA with ASA-5515 (9.4(1)) I faced with the problem concerning RRI (reverse rout injection). I noticed that ASA doesn't insert route in routeing table when vpn-tunnels become up. crypto map office 1 match address ipsec2...
As a newbie in ASA configuration and use of ASDM I'm about to exchange some old non-Cisco firewalls with new ASA 5506W-X. This seems to be more confusing than first assumed. The infrastructure is fairly simple with a main office featuring an inside n...
Hello All, I am running in firewall routing issue; Please help me if you can. I have cisco 5520 ASA configured with sub-interfaces on inbound and outbound interfaces. default route is set to 0.0.0.0 forward to a reachable ip address. configuration:- ...
Have asa 5525 running on version 8.6.1. On which version I can go supported on the device to fix recent snmp vulnerability.
Do the ASA firepower upgrade module (SSD) come pre-installed with firepower software?
Have asa 5525 running on version 8.6.1. On which version I can go supported on the device to fix recent snmp vulnerability.
Hello, I have problem with ASA 5516-X. When I try to update Firepower rules I get the following error: "Connectivity problems. Unable to download rules." I logged in to sourcefire module and: @Sourcefire3D:~$ sudo ping 8.8.8.8PING 8.8.8.8 (8.8.8.8) 5...
I have an ASA 5525-X with the Sourcefire module and would like some verification about whether HTTP inspection should be enabled on the ASA. Basically, on my 5510 I had a HTTP inspect policy configured on the outside interface (matching specific URI ...
What's the difference between, just for example, "login block-for 100 attempts 15 within 100" and "security authentication failure rate 3"?Please ignore the numbers, I need to know what the differences are in commands and what they do, what they affe...
How do I restart me Cisco Firewall.
Hi, I have configured 3 interfaces of ASA. inside, outside and WiFi. Where I have given full internet access to WiFi subnet by allow destination any. WiFi vlan is routable vlan bcoz to access WiFi portal through WiFi subnet. Now to playing with righ...
We currently have a pair of 5585x ASAs with the ASA5585-SSP-IPS10 blade that will be end of life sometime in early 2018. Given that our peak concurrent connections exceeds the 500,000 limit mentioned in an earlier post, would it be more cost effectiv...
Hello, I just obtained an ASA 5508-X w/ firepower services running version 9.6 and am having real trouble getting what should be a simple configuration up and running. I have some experience with PIX and earlier (pre 8.4 apparently) versions of ASA, ...
On ASA 9.1 i am trying to export an Identity certificate, self-signed certificate into p12 file so i can import it into laptop and used it for secure connection to ASA over ASDM. I can add certificate OK using ASDM, certificate show up OK in Certific...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-10-2026 08:58 AM | ||
| 08-10-2026 02:48 AM | ||
| 07-22-2026 05:00 AM | ||
| 07-16-2026 06:39 AM | ||
| 07-15-2026 08:48 AM |
| User | Count |
|---|---|
| 4 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
