HiI've not deployed a CX module before. We are about to deploy 2xASA5585-X firewalls with CX modules, (for AVC and WSE).I'm pretty sure I know the answer to this (I've deployed plenty of old OLD ASA's with CSC modules in them, and I'm guessing the CX...
Hi, my customer operates himself a VM for Cisco ISE, so he needs no smartnet service thats ok. Now he needs L-ISE-BSE-100= (Base Licence) 100 teers. Question: Can he gets during 5 year maintenance time updates and tecnical support for free??
Hi, Can any one shed light on whether SUSA (Now SUSW) is absolutely needed as secondary coverage to the SU1. With the SU1 what kind of support is provided on for the signature?? Many thanks in advance for your soonest response.
Hi I have IPS with version 7.0.4 and I need update to version 7.1.8e4 but i can't load the license because show a message is not support for this license. Then the device has other license but the devices not run other license only 7.1.x but i can't ...
When configuring an ASA for IPS, does the IPS access list need to be the first access list in the configuration? For example, in our environment, we want to have every packet go through the IPS. So, if my current configuration is as follows, does t...
I recently went to enable IPS on my 2901, and I noticed a massive latency issue when I enabled it. Throughput dropped from 120MBPS down to about 66-68MBPS. Is there a way to institute IPS on a router without experiencing this kind of severe degrada...
Hi,my network layout is like this:To reach my webswerver I made a static NAT-rule for DMZ webserver/outside. At this moment it is no more possible to build IPsec-connection from my iPhone to the inside-network.What can I do?regardsJürgen
Can someone explain how I can activate my license for a Firepower 8260?
Hi There,I have the following Interfaces and routes. interface GigabitEthernet0/0.127 vlan 127 nameif Vlan127 security-level 50 ip address 192.168.127.1 255.255.255.0!interface GigabitEthernet0/0.128 vlan 128 nameif Vlan128 security-level 50 ip addre...
Hi everyone, I need help setting up an ASA 5510 to allow all traffic going from the inside to outside so I can get internet access through it. I have worked on this for days and I have finally got traffic moving between my router and my ASA, but that...
I'm troubleshooting a scenario where I'm getting countless TCP DENY messages in cisco asa 5585 traffic log. The sample logs looks like:-Troubleshooting cisco 5585 ASA-6-106015 messages related to TCP deny syslog message166>May 07 2014 13:04:50: %ASA...
Little confused when researching the ASA5545.What would be the benefit of going with the CX module compared to the classic IPS module ? Can both do signatures ?
HiI'm about to deploy 2x ASA5585-X Firewalls (with AVC and WSE). Management and configuration will be done via PRSM.The client has read (I don't know where, I cant find any corroboration), that the information (user tracking, exceptions, etc) that AV...
Hi folks,I am trying to determine if it is possible to create custom IPS sigs on the ASA-CX module? Not the ASA + Legacy IPS combo, but the ASA + ASA-CX (Application Detection, Web Filtering, IPS) combo.I couldn't find anything in the docs that said...
I have several NAT statements pointing External to Internal on an ASA. When I do a packet-tracer, it appears that everything is working, but I can't get to it via the IP...The command I ran was this:#packet-tracer input outside icmp [MY IP] 0 8 [Ext...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 09-08-2026 10:14 AM | ||
| 09-08-2026 07:04 AM | ||
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM |
| User | Count |
|---|---|
| 4 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
