Hi. I have the following scenario and not sure how to build a NAT for it. Using OS 8.3(2) ASA 5510 secplus licI have a device on Outside interface that ONLY can talk to devices on its own broadcast domain, but I have a device on the Inside interfa...
Hello,Quick question; How does the Cisco ASA 5510 operate on an incomming traffic flow? Does it apply the source NAT first and then match rules according to the translated address? Or does it match rules according to the original source and then appl...
I have ASA5505 and am having issue with port forwarding NAT which I hope someone could enlighten me where my issue at. ThanksOutside int = 213.12.137.13 (ADSL permanent IP)Inside IP = 192.168.1.1 /24I would like to have incoming traffic from internet...
I havent been able to locate how to actually get the IPS Module active for a trial, Im able to install the image, access via ASDM/SSH, I get the Trial on the sensor itself running, but on the 5525 it shows as Disabled no matter what command I run. W...
Hi experts,If so how to enable it? Thanks a lot in advance. Regards,
When I am configuring SSH on cisco asa 5505 for its show network address invalid.Version 8.2(5)plz help.................
is any license required on ASA 5505 for active passive configuration ?
Hello,I am hoping someone can help me out to get this VC traffic through this network. I am quite new to ASAs, and I feel I am making a tonne of headway on it (much thanks to everyone here!), just seem to be caught on this one issue.The setup: The VC...
Hi All,On Cisco ACE, can you souce NAT 1x IP address to multiple different source IP addresses where each destination is unique. So for example:Original Source = 1.1.1.1Natted Source = 2.2.2.2Original Destination = 10.10.10.1Natted Destionation = Ori...
I have an ASA 5505 and I have the three regular vlans, outside, inside and dmz. The best would be only have outside and inside and skip dmz, but without explenation there is not possible to have more then two clients in whats now dmz because of a mac...
hi everybody,I'd like to ask if it is possibility to block only gmail.com. gmail uses https. I don' t want to block google.com and I need to pass a few https web sites.maybe it will be better when I block all https flow and pass only a few https web ...
Hey all,We have an ASA 5520 with multiple public IP addresses. I am using one with a one to one NAT translation and an access-list that is allowing ip any on that public IP address. The device sitting behind the firewall is a sever listening on 443 a...
Hi,I am able to ftp from my Head Office to my test machine at the remote location but I can't get the other way around to work. Error message from the Syslog deny tcp src 192.168.50.5/1825 dst 208.124.202.44/21 by access-group "dmz_access_in"I try a ...
Hi,I am working on translating configuration from a firewall named Joebox to ASA 5515.On Joebox, it has 5 continuous public IP addresses (xx.xx.xx.73 -77/29), first one as interface IP and others as alias, on the Internet-facing interface.I need to c...
Hello,I have a site that has a T1 - I need to reserve the bandwidt for all internet traffic to 90% of that T1, while allowing the voice traffic which is on a specific port to use all 100% of the bandwidth. Please advise on to the best way to achieve ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM | ||
| 08-19-2026 07:59 AM | ||
| 08-10-2026 08:58 AM |
| User | Count |
|---|---|
| 4 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
