Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
Hi,Everything was working fine till one day, when clicking on Configuration Button you see setup wizard prompt.It's ASDM ver:6.2 and ASA 8.2. Everything is working fine, but now unable to change any rules.It there simple cure for that?Thanks.Marcin.
Hi guys, Can anyone help me why i can't access the servers that is on the corporate network that is located on the trust side of the ssg140 firewall using anyconnect vpn.my network topology goes like these: dmz untrust ...
Dear Experts!!!!I am using ASA5510-CSC-10.If i send mail to the someone, he is receiving that mail repeatedly.If i removing SMTP and POP3 filtering in my acl that will give permission to go that traffic to CSC, all are working fine.Problem is coming ...
Hi,After upgrading to latest version IPS 7.0(7)E4, the IPS is not up right. In the ASA it appears Not Aplicable and i need to restart the module. Sometime later the IPS appears again Not Aplicable. I can not access via ssh or ASDM, only session 1.I u...
I am planning to setup a DR Firewall, we already have the primary and standby firewall on place, I need a guidance on how the traffic will be managed and controlled.ThanksAli
HelloThe problem is that DHCP-Relay is not working over the VPN. I want the remote site to get there IP-addresses from the local site from the DHCP server. Here I can give extra options and DHCP-reservations with it. The VPN is working when I work wi...
Hello,I'am using ASA5510 and I configured a VPN IPSEC. When I connect to the vpn with a windows client ( using windows vista) , I have access to the network ressources but when i want to go on the Internet it doesn't work. (particulary with Internet ...
Dear all i have an issue while configuring Cisco IPS4255 in lab, when i configure the two interfaces of device as inline interface pair mode and create an attack using any signature such as 2004 , 11020, 3401 , the actions of signature i.e. deny pac...
We have a Cisco ASA running 8.2(1). It appears to be crashing around once a week, and a restart resolves everytime. When the unit crashes it is not being configured, etc.. it is just performing its usual function (firewall). I am not onsite with t...
I have created a site to site tunnel with range 10.x.x.x Now i want to creat a site to site tunnel with same range range with same policies as created with first tunnel ,with other far end peer ip.Will this creat a problem .
Hello Everyone,I want to first say that this is my first time ever working on an ASA, so I appologize for the elementary questions. My task today is allow incoming HTTP, and HTTPS traffic to my internal IP Address.Currently this firewall is up, and ...
Hi,I alreay have smartnet contract for my IPS. Now, I need to do auto upgrade my IPS signatureWhile i was doing, it ask me to activate license key. How to get the license key for my IPS?Regards, CT
I know there has to be a way to filter the logging on the ASA CLI. The "sh logging" command is obviously all logs on the ASA but i would like to filter the logging based on perhaps a source IP or dst ip or port. I can do this in the ASDM using the lo...
I'm trying to find this in the software center, but no luck. We have an old PIX 501 whose configuration I'm trying to convert to an ASA 5505. Any thoughts?
