Network Security

Hello,I have a question about a migration NAC Appliance 7.0 version in L2 OOB deployment to L3 Real-IP Gateway.Do I need any other issue to this or I only must change settings on CAM in "Clean Access Server Type"?I don't have a lab to test it.Kamil,

Hi, whats happens in ASA 8.3 if you have two NATs with the same origin (i.e 192.168.1.3) and different outside (i.e 10.10.10.5 and 10.10.11.5)?. In older release of ASA it works by position in list so the first NAt is the first applied. Works in ASA ...

I've just started using IME, and it appears as though the log files for reports and events aren't stored on the SSM, but are actually stored in IME. If this is the case, do most of you leave an instance of IME running all the time? What are you doing...

I've got a pair of ASA firewalls that are accessed via a SOCKS server, so all management sessions to it is from this one ip address. The firewalls are running OSPF and learn the route to the SOCKS ip subnet via OSPF, so we are unable to directly acce...

Hello,I have added all the devices into CSM 3.2. However, I am not able to launch the device manager. Going thru User Guide for Auto Update Server 3.2.2, I foundhttp://cisco.biz/en/US/docs/security/security_management/cisco_security_manager/auto_upda...

Hello guys.I have asa5510 sec plus.Im new to cisco.WAN IP: 77.68.136.96 - 77.68.136.102Is it possible to send traffic from internal host like: 192.168.10.31 out through another WAN ip than the one bound to interface "outside" ?I tried it with this co...

How to change the SSL key length for the certificate of https management interface ?

I realise thatthis is more inteneded as a support forum, however I have been trying to track down an organisation that can install an ASA5505 in our Chicago office (875 N Michigan) and cannot find anyone who supports small businesses.  I'd have a cra...

Hi,I have 2 ASA 550, one is active with its failover with version 7.2(2).I want to upgrade this image to 8.0(3), if this possible, and if so, i must do it for every one alone or on one of them and it will be copied by default to the failover.Here you...

Hi,On CSM Client >device> Access rules is showing the old config and not showing the active running config. Where as tools>preview configuration show me the running config.How do I make the csm client show the running config.Thanks.

Hello,I am having Cisco 2801 Router, just for testing i have applied secure boot-image, now i want to get it back to normal state through consolebut i am unable to do that.when i issue the command     show secure bootset, i get the below output.WAN-R...