Network Security

Hi,We have 2 ASA pairedup.failover state on the primary shows the secondary as "failed".Management interface is used for failover, which is up.Failover reason states inside:no Link.Any reasons for this?Any directions on how to check further to bring ...

HelloWe use the WebVPN feature on the Cisco ASA. This works fine but for some users they get a message saying "Login denied. Your PC has not met security requirements"We have checked there firewall / os /av and they look to be on our approved list.Is...

Does anyone have any suggestions for setting up QoS on an ASA to prioritize video conferencing traffic traversing the internet? We have a Tandberg Edge system inside NATed in the ASA with a legal address.Thanks!JF

Dear All,I am trying to configure my ASA 5510, I restored it to factory default settings by using(config)#configure factory-defaultnow,, in the books, the author said, by default there is no username and password to sign in into the ASA,, but when i ...

Dear All,,I am installing ASA 5510 security + but having some problems,, i.e.. inside is unable to communicate with DMZ and outside,DMZ is unable to communicate with Outside (internet) and inside,Outside is unable to access DMZ and inside,Please see ...

Hi,NAC fires the requirement of AV rule of trend micro but doesn't update the NAC once its updated so it keeps asking to update the AV every time. Any idea

Hello allI read in the release notes, that FWSM 3.2 supports MS DCERPC inspection.How does it work?client connects to server:135/tcpA dynamic tcp port >1024 on the server is mappedclient connects to server:>1024/tcpAs far as I understood, DCERPC insp...

Hi, my question is how can I make a source NAT within a Static PAT Rule? Static PAT changes only the Destination addresses and not the Sources. Background is that for routing issues the original sources should be hided behind the interface ip.Is ithi...

Equipment list:SSM-40-(AIP-SSM)Problem statement:-License file downloaded & activated on IPS-Unable to download IPS signature file manually using CCO Account.Question :What is the correct way to bind a CCO account to obtain access privilege; inorder ...

Hi all. I would like to verify if upgrading my asa5510 to version8.1 allows the support of netflow. Thks in advance.

Pros,In the Dual 6509 switch in VSS environmnet,there are 2 contexts created and C1 context having 15 svi interfaces. One out of 15 is user vlan. When i configured the PC in any one of the vlan and pinging the gateway of the SVI from the pc getting m...

Hello everyone. Have, hopefully, a straightforward question here.Brushing up on my ASA skills (been awhile) and have been going through my notes and just need a little clarification on some things. More or less, just want to make sure I understand a ...

Hi Guys,I have a netgear router set up in bridge mode. Now I want to connect the pix to it. What I want is for the pix to get the external ip address.Do I need to put that wan address on the pix outside interface or shall i set it to obtain it via dh...