Network Security

Reference link below:http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/inspect.html#wp1504796I am having hard time in interpreting the example of issues in mobile phone GPRS network and implementation of radius accounting inspect...

Hi, the Firewall configuration is attachedWhen I try to access by remote desktop from outside IP to 196.44.242.51 Server (vrw-appdb-001) then I am not able to connect. Please check above config if you find anything wrong then please let me know.

Hi, I have a cisco PIX 515E. I have 6 interfaces. Off one of the interfaces is a cisco 871 router which i have setup to act as a gateway to access another network. The internal interface sec level 100The cisco_router interface sec level 80. From the ...

Hi,This weekend I'm migrating a Netscreen's firewall rules to a PIX .I was hoping someone can take a look at what I plan on doing and let me know if there are any possible issues. I am not so much concerned with the issues of in-bound security. More ...

All,I have a distributed environment consisting of CSM 3.1 managing several ASA (5520 and 5510). I have remote access policies configured and each firewall is configured to issue an IP out of a different IP pool.There is a different rule for each fir...

My concern is that our current PIX 525 is hitting CPU utilization rates of 70%. While the unit has a rated throughput of 330 Mbps, we have a CIR of 55 Mbps. Does the ASA works similarly, this would give us a real-world throughput of 75 Mbps. Will ...

Hi All, I have 2 3750G series switches on the trunk link. some machines are part of vlan1 on the switch 1 and some machines are the part of the same vlan1 on the other switch2. I need to limit the bandwidth between the switches for the vlan1. picture...

Hi, We are using ASA FW and all configuration is setup properly but we have an issue but we are not sure is it required any configuration on FW or its a conf issue. DMZ machines and Internal DB machines are getting access wach other fine and one of w...

HiI just installed a ASA 5510. We are trying to use the VPN Client I am able to connect with the VPN client but then I can't seem to view anything on the company network. Any ideas?Thanks

Hello, i have ASA 5505 BAse licence, i want to configure inside to go to DMZ and inverselyThanks

Hi, ASA FW is configured for our branch office and Access to our servers seems to have slowed down significantly from outside network. Can anyone send us intructions what should be do to resolve this issue .Thanks.

Hi, Can we assign bandwidth a particular machine/device/server. I have 1 mbps lease line can i allocate 256*2 for two servers and rest bandwidth by default assign (512) to local network users.