Network Security

Hi, I'm not sure if the Pix should be doing this or our Internet router which is a Cisco 2600. Anyway I don't have and QoS running on my Internet pipe. I recently put Netflow on the Cisco 2600 router and suddenly realised that the ftp downloads and...

Is there any way to save more than 4 snmp server hosts on an ASA 5505?I can add more than 4 but if I try to save then I get an error. Is this a bug?

I have setup an ASA cluster to use Redundant ISP Links as show in the cisco examplehttp://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806e880b.shtmlThis works fine for outbound traffic, i.e. web browsing. How...

I want to upgrade ASA from 7.0(1) to 8.0(2))and ASDM 5.2(1)to 6.0(2)for Cisco ASA 5505,but I only find a upgrade procedure for ASA from 7.0(1) to 7.0(2) and ASDM 5.2(1) to 5.2(2).Please everyone can recommended me some tips about upgrade procedure, t...

Hi,I have been using PIX 525 for about 5 years.Now I need contenet filter and URL filter feature in firewall. I think I have to bye ASA series firewall.does is solve my problem? should I renew it again and again.If I do not renew does URL filtering a...

Hi there, we have an ASA 5510 and have a VPN to a 3rd party who use a Checkpoint R62 Secure Platform with 4.1 Nokia IPSO and there are a few problems with the VPN establishment.We know there are lifetime differences and have set according the 3rd par...

Dear sir,iam having pix 515e firewall now iwant to implement ipsec vpn and point to pint plz give me the examples how can i configure.Regardssrini

My customer says that performance through the FWSM was very sluggish. He said he switched over from active to standby FWSM and everything is fine after this.I want to ask him to switch back to the suspect FWSM module again to see the problem first ha...

I thought I was following this how-to and it seemed straightforward:http://www.cisco.com/en/US/docs/security/pix/pix63/hw/installation/guide/515.html#wp1048874But the primary cluster is not copying the configuration over to the secondary.I configured...

I have an asa 5520 currently running with a t-1. I would like to add a physically seperate t-1 to load balance ..is this posible? 2 seperate isp routers.

Having trouble configuring an ASA 5505 with a DSL modem. All interfaces show "up" but there is no internet. thoughts??

CISCO-PIX-515E:I am NOT exposing port 445 to the internet (as I have no need or disire to do so and am well aware of the security issues) - but I have noticed that one of my DMZ hosts (an SSL VPN Server) is trying to pass 445 traffic internally - so ...

Hi,s/w- 3.1(8)Can anyone guide me how to configure fwsm in transparent mode with multi conext.Is it ok with a sharing Interface between MSFC & FWSM (all the contexts)I beleive dynamic routing protocal is not supporting in any of the modes with multi ...