Network Security

Hello, i bet this has being asked many times, but i cant seem to trace any.this is my network.pix501 -> noncisco switch -> catalyst 2950.I want to configure three VLANs on the 2950. What would be the configuration on the pix to route the vlans. Thank...

HelloI have my PIX 515E Restricted (16MBRAM/8MB)- 2 Interfaces.I like to implement:- 7.0 OS Software- Failover- Out of Band Management InterfaceIt's correct that I have to buy:- Upgrade License to UR for my PIX- 1 new ETH Intefaces- 16MB Flash / 64 M...

Dear all,I have two pix 525 firewalls ( one with UR license and the second one with FO-AA license) , firewalls are running in active/active mode . this set of Firewall is connected to a perimeter router connected to Internet , My question is how do i...

Who knows how to configure PIX firewall 501 to allow another network to ping the outside interface of the firewall? Please Help...

One of our site offices have a PIX 506E firewall and connectivity through the PIX is all well, except for port 9999. The access-list applied on outside interface (inbound) is below. access-list acl_out line 1 permit icmp any any (hitcnt=5)access-list...

Hi All,A quick question about access-lists. I have a site-to-site link using two PIX 515's. I have a requirement at one end to make a PC-to-site connection to a completly different network. However the network I am trying to connect to is on the same...

I want to be able to have remote sites that already have vpn tunnel back to headquarters access the url-server. I am unable to do this. Error: 110001 Server not respondingNo route [url-server-ip] from [pix-inside-ip] The log on the concentrator reads...

I want to request a new SEP or SEP-E modules for my VPN Concentrator model 3015 to be 3060. It seems that i can upgrade 2 SEP-E for upgrading and 2 SEP for redundancy, is this redundancy includes SEP power redundant?. Can you please guide where i can...

I have a PIX501 firewall and periodically my servers behind the PIX will lose connection to internet. When this happens I'm able to ping external addresses from outside interface but not from inside. When I reboot the firewall I can access internet a...

hi i m facing a problem , whenever i try to access the idm 5.0, after giving the user name and password , it just shows opening-2 , but it never opens. can any one tell me the solutions, i have already checked the cookies and java.

Does the Cisco VPN concentrator support ip cache flow, to export to netflow collector.Thanks in advance

When upgrading from Pix OS 6.3.x to Pix 0S 7.x, Cisco says that the old fixup commands are translated into the new inspect and policy commands.So if I had a line as: fixup ftpthis is translated in something like: class map inspection_default match de...

We are running 7.0(2) on a pair of PIX 525. We have a syslog server and we are demoing a system that analyizes syslog messages, so we need the PIX to send syslog messages to two hosts. We defined two hosts with the following commands, but discovered ...

Hi allI am connecting vpn to PIX through pptpclient.After successfully connecting the client I am able to ping to the inside Routers but failed to Telnet.Can anyone help ?Thanks in advance