Network Security

Anytime we attempt to configure the Novell NDS External User Database in ACS we get the following error messages. An error has occurred while processing the External Database Configuration Page because of an internal error.. External Authentication C...

I need a firewall PIX with three interfaces ethernet (DMZ).What's more cheaper solution about ?thanksLorenzo

We have a 3030 running 4.6.x with a fairly simple configuration. Currently we have just one group configured on the concentrator into which all users are placed. We authenticate our users with a radius server. The radius server in turn gets authentic...

Dear Sir!After password recovery procedure on PIX-515 (6.3(4))after ENABLE command, my PIX begin to ask me Username:Password:I don't understand how it's possible (why Username?)So, I can't to enter to privilege mode. How can I to recover my PIX anywa...

I've been looking for solid guide on Cisco's website that highlights the primary tasks for deploying any IDS or IPS appliance into a production network and maintaining after deployment. Does anyone have any links?

Hi..One of our clients wants to be convinced that a powerful router (3700 & above)with FW IOS cannot replace a PIX FW in his network, which is comprised of a core router connecting to 6 routers via ATM and another router connected to the internet.The...

I'm having alot of problem with FTP...... This is how my network was setup. I have a firewall, Cisco Pix 506E which is connected to a Cisco 2950 switch.I used NAT where it translate my Private IP to Public IP. I've open up Port 21 on my Firewall for ...

Using the Cisco VPN Client to build an IPSEC tunnel to a Cisco 3620 (IOS 12.3) and then a pptp tunnel through the IPSEC tunnel works perfectly. We are currently migrating from the 3620 to a 3015 concentrator. The client builds the IPSEC tunnel and al...

HiIs it possible to do some kind of QoS in the pix to prioritize traffic going into Lan2Lan-tunnels over other outgoing traffic to internet?Regards Jimmy

SH VERCisco PIX Firewall Version 6.3(3)Cisco PIX Device Manager Version 2.0(2)Compiled on Wed 13-Aug-03 13:55 by morleefire up 12 hours 49 minsHardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHzFlash E28F640J3 @ 0x3000000, 8MBBIOS Flash E28F640J3 @ 0xff...

Hi There,I have a PIX515 with an outside interface with address 10.6.10.140 - can somebody tell me what commands I need to enter on the PIX to be able to telnet to its outside interface from the LAN connected to that interface?Many thanks,Dan

Need to validate that if this Microsoft Article is applicable for Cisco PIX Firewall's aswells:http://support.microsoft.com/kb/899148Need documented proof with explaination in either case.Cheers...Prashant Chauhan.

Recently I read some document regarding the Microsoft ISA Server 2004. It claims it will do a better job than the traditional firwall.Could anybody share some opinion and comments on the pro and cons on comparison of MS ISA Server 2004 with the Cisco...

I wan to update my brnd new installed IDSMC2.1 with IDS-K9-sp-4.1-5-S189.zip file, but the update process doesn't start. The job is just waiting in the Pendig Sig Jobs List.Any idea?Thnx

I have recently purchased a second hand 501 running 6.2 pdm version 2.2 and was wondering how I can get the bin flash file for 6.3 pdm version 3.0.Can anyone help