We have (4) CBS220 that periodically reboot. At first at thought it was maybe a power issue, but we have confirmed that our UPS units are good and another Cisco switch (CBS250) on the same UPS as one of our CBS220 does not reboot. The CBS220 may...
Dear Cisco team, I have an SG300-10 - yes I know, but what can I do After an interrupted loading of a configuration, I reset the switch - hold down the reset button - wait 30 seconds, switch off, wait 30 seconds, switch on again, wait 30 seconds. I ...
can anyone suggest me CBS350 Firmware upgrade Path from 3.2.1.1 to 3.5.0.26 . or i can go directly to the latest one . is there any documentation or source by which cisco guide for upgrade path ?
Ive decided to be more granular with design and instead of a single all encompassing network I've broken things down.I need to move switches t the new networks but can't see an option to edit that? Can't find anything in docs or on Guru Google.Ideas...
Get the following login failure:Due to registration failure, If the problem persist contact ITsupport. I reset my password and the system appears to reconize my account. Any help?
I have https firmware uploads failing on multiple switches at different clients. The logs show a generic "the copy operation failed". Two of the switches:CBS350-24p-4G | firmware v3.2.0.84CBS350-24p-4x | firmware v3.3.0.16An upload of the same firm...
We are approaching our latest step in relabelling posts across the Small Business board. The read-only mode that will be active from April 11th to May 9th. This initiative aims to enhance your experience by making it easier to locate similar posts. T...
I have a new set of CBW 240AC AP's and two CBS250-8FP-E-2G switches. I am having a problem with when clients roam between AP's connected to the different switches. There is no issue when all of the AP's are connected to a single switch, roaming works...
I rest my Spa508G telephone which is for restaurant.and now my line is not working it’s asking for CMS login. I don’t know username and password. It has to be in numbers too. I have 3 telephone with 3 lines.
Good day All.I need your support regarding the firmware update procedure for my Cisco WS-C2960-8TC-L.I'm using it just for test purposes.At the moment the software version is 12.2(35)SE5.In the official page (link) the most updated version available ...
Hi everyone.I need to upgrade the firmware on a Cisco RV320. Before doing so, I want to create a restore plan in case anything goes wrong, as the current version (v1.3.2.02) has been running for almost 10 years.I checked the downloads section, but I ...
Hello,Within the past few months, we integrated SPA 303 phones within our small team. I am looking to configure 3 of these devices (as I am the admin) to monitor the status of each other. There is the following section from the user manual, however, ...
Hi Team Any one can help me to know latest support vmware version for below model Cisco UCX HX-E-220M5SX SN: WZP24172923 , WZP24172927, WZP2417291Y Servers are out of warranty at the moment. our intention is to know that server support latest vmwar...
Greetings, I have some switches (CBS 250/350) with firmware 3.0.0.69, 3.1.1.7 and 3.2.0.84. I would like to know if possible from those versions to 3.5.0.26.