Cisco Catalyst Center

We just upgraded our Cisco CC to 2.3.7.11 and noticed that when we upgrade our Cisco 9300 switches running in a stack using swim from 17.15.5 to 17.15.6, after the reboot when the switches come back online the are missing the port configuration for s...

I have a requirement to monitor the input/output utilization of sub-interfaces configured on Cisco switches using Cisco Catalyst Center (Version 2.3.7.9)For example, we have sub-interfaces such as:GigabitEthernet1/0/1.50GigabitEthernet1/0/1.100Gigabi...

Hi Team,we are trying to onboard AP with CLI template in CCC without site assignment. i am getting error while deploying it. we are using C9136I-B Error : NCOB04013: Failed to apply configuration on the device. (PnP Service Error 1400. Invalid JSON c...

Buenos días colegasQuiero acti¿Es posible su ayuda?Saludos

I started configuring the Catalyst Center offline. I ran into problems with validating some services but, I was able to configure a static route before trying to back out. Once I backed out, I got stuck at the static IP configuration screen. How do I...

What happens if a device is removed from Catalyst Center but still appears as consuming a license in the Smart Account? How can the license be released?

Cisco broke some funktions in wireless with the latest hardening release and as a Catalyst Center user I'm not getting any information about that. There is no hint that the hardening update is breaking something.In addition to that one week after Cis...

Hi,When overriding certain wifi settings for a particular site in DNA Center, these changes creates a unique profile that is pushed to the wlc.How would i inherit back the global settings for this site? 

Hello together,currenty I've an old ISE 2.7 integrated (standalone) in my CatC v.3.1.6.The ISE need to replaced with a pair (active/standby) that are at version 3.4. So I found this guide:reintegration guide ciscoIn this Guide it is described how I d...

When trying to import an Ekahau Site Survey into Catalyst Center the floor map imports but the AP's and RF info are not on the map. The AP's and RF spectrum show up on the Ekahau Survey within Ekahau AI Pro and I can obviously manually add the AP's t...

This issue was experienced on Version 2.3.7.9.70301.10

Here is my configuration.  I have 200 sites.  180 of the sites are going to be Flexconnect and 20 are going to be Local APs.  They all have the same SSID.  All the 180 Flexsites will have the exact same configuration.  So I created a Network Profile ...