When I activate an PA-ruleset with PPS on my phone, it sets the rule, but update PA fails so the rule doesn't work. 'Update unsuccessfull'I am running the latest software-releases.Does anyone has an idea?Thanks,Sascha
Having choppy voice quality from the PSTN terminating on a VG200 gateway(12.1(5)XM4) running MGCP, call manager 3.0(11), Catalyst 3524-pwr switch this is all on the LAN nothing going over the WAN. A call comes in from the PSTN into the VG-200 and ha...
Hi, I got problem with my as5300. I have 2 as5300. Gateway A using private ip and Gateway B using public ip. I can ping from Gateway A to B and Gateway B to A. But I can route a call from Gateway A to B or from Gateway B to A. I have checked dial-pee...
I'm using separate voice and data PVCs in my VOIP network by using access lists to separate the traffic. Problem I'm having is I need to send the html traffic from the IP phones for the phone services down the data PVC even though the IP addresses a...
I have seen some bugs relating to internal/external ringing for MGCP & H323 which are fixed in CM 3.0(12) Is there a fix for this on the 6608 which uses skinny?My customer cannot tell the difference at the moment
We been having quality issues with Unity across WAN sites. I ran an analyser check and noticed that the Unity system does not set any IP Precedence (Unlike CM or IP Phones). I know its possible to set this via the router, but does anyone know if its ...
Trying to connect a PBX to a PSTN using 2 Cisco 1750 routers with VIC-2FXO-EUR cards.If we ring the number attached to the PSTN then we get a dial-tone and we can key in digits. According to debug information this call gets routed to the other route...
now I have cisco as 5300, work as voice gateway.we will provide voice over IP service, how we can resolve the billing system?Do we need work2000 utility?
Just downloaded the IOS 12.2(2)XT providing IOS Telephony Service version 2.0 and it works great. Many more features than the basic IP Keyswitch. Unfortunately though, the instructions say to download the HTML files in order to do HTML configuration ...
Does anyone know if the DT-24+ supports multicast MOH? I have Multicast MOH working on every device in my network but not through the DT-24+. I can't seem to find any material stating that it's not supported.
I have a 3662 router that runs the 12.2.(1) Ios version.The configuration is:Cisco Gateway ---- Internet ----- SIP Phone | | Fa0/1Voice Gateway ----- PSTN | Fa0/0 |Internal LANThe Fa0/1's Interface of the voice gateway router is ma...
In a PABX we can determine that certain users can 'Forward-all' their calls to GSM (Mobiles for the US) and other don't; nevertheless all can dial a GSM (re. to the dialplan). I wonder how in CM3.1 we can setup a rule litke this otherwise all sales w...
I have installed Unity on a ML380 (same sort of box as a CM 7835, 733MHz 1Gb RAM, not running CM). I have exchange 5.5 installed and the box is setup as a W2k DC. I have installed MSDE 2000. I have run SP4 for exchange and SP1 for MSDE and SP2 for W2...
I am looking for some holiday related ringer files. I am not too swift with making ringers and I just had a customer ask for holiday ringers. If anyone is willing to share their ringers, it would be appreciated.
If an external Phone is calling an IP Phone the following happens: After it rings on the IP Phone and the user goes off hook, he can't hear anything for approximately 2-3 seconds.After this time the call will be established and all works fine.Any ide...
