Hello,
I thought I posted this question but can find no evidence of it. So forgive me if I repeat myself.
I would like to find an "examples" of setting a login user to have a limited set of functionality. I searched within IoS command refreences and ...
Hi,
I'm config Kron policy recurring every day at 17:00 it work but the kron occurrence config disappear after run once time.
I'm currently use IOS (C2960-LANLITEK9-M), Version 15.0(2)SE9, RELEASE SOFTWARE (fc1)
please help me for the same, below is ...
Hello All,
Any one please explain about the below mention file...what is the role of this file and why its showing in flash:
/bootflash/core/IGSKOLSBIRTR01_RP_0_ucode_pkt_PPE1_3365_1493811923.core.gz
Regards,
Sohel Jujara
HiI use 2901 router as console server (ver 15.0(1r)M15)It has serial module installed with many connected devices (cisco routers, switches, juniper routers etc)I recently noticed a large number of messages such as:072176: Apr 23 17:08:22.349 VLAT: ...
Hello
I booted my Catalyst 3750-X Series and i get the following errror;
Using driver version 3 for media type 1Invalid parameter block -- no mac address available.Xmodem file system is available.Can't set variable with illegal char "▒" (0xffffffff...
I am capturing the traffic for a particular system using span port. My wire shark analysis shows a flood of communication with source and destination IP listed but these two IP's (source or destination) does not belong to the system I monitor. The co...
I am trying to stack 4 switch on a ring topology. All switch will be on layer 3
Vlan 1 will be on 192.168.21.X (ports 1-18)
Vlan 2 will be on 192.168.22.X (port 19-24)
Vlan 3 will be on 172.28.X.X (planning to make port 25-26)
We will have 2 sfp up ...
I explain the differences between Nexus and Catalyst switches but also compare commands, naming conventions, hardware capabilities etc. between Nexus NX-OS and Catalyst IOS operating systems.I am looking forward to your comments!http://www.firewall.c...
Hello Everyone,
I am new here, my name is Joshua Mendieta, i got my CCNA R&S at the start of this year, and now i am studying for my CCNA Security, and meanwhile i am trying to do some freelancer jobs in networking to get some money.
The Reason for t...
Hello
I have a question related with the maximun Bandwitdth that i can offer to a client with one cisco ISR4321, using the front panel 2 ports.
the question is if this router can support simetric 100Mbps conecting the WAN on the port GigabitEthernet...
Hello.
We are going to replace ios of catalyst 4506 ,and we have two types.
・~.bin
・~.tar
Are there any correct or official methods to replace ios of catalyst 4506?
If so, we'd like to replace following the rules.
（If possible, we also would like o...
Hi,
I was wondering if anyone could help me find out what each of the wires connecting the fan to the motherboard of the switch are for? With there being more than 2 I am assuming that there is more than just a positive and negative for power?
Than...
I'm troubleshooting voice issues for a customer. Can someone tell me if the service-input policy and the "mls qos trust" are repetitive. meaning, if I'm already trusting DSCP in the service-policy, do I need the mls qos trust dscp command? Is the ...
