Other Network Architecture Subjects

Hi!I've read the section "configuring SPAN and RPAN" in the document Catalyst 3550 Mult...configuration gude. The documentation is good but there is not alot of configuration example.I've look on the cisco web site for more example of configur...

Could anyone help me read the error message below. I've tried both cisco tools online with no success. This is happening on a Cat 5000. 3/24/3,13:12:32: blkcmbParityErrHdlr: LKUPRAM, intr=40, addr x00e4c, data 1001-0, cnt 13/24/3,13:12:32: blkcmbPari...

I currently work for a company that uses a class b address with the default subnet mask. It's one big happy flat network.I am upgrading the network with new equipment (Catalyst 4507R) and I want to establish VLANS (currently there are none in place)...

I have a spare 2600 router that has the DSU/CSU built in. I would like to turn this into a RAS. I would like to have a T1 connected to the DSU/CSU and have 10 modems coming off the 2600. Is this possable?Does the 2600 have a asynchronous WIC?Can ...

Is a 1E WIC card available on a 1600 router ?

Hi,Does anyone know what this port is used for? Or what VFO is standing for?I found lots of traffic between port 1056 and 139 (after ran the packet sniffer) but could not figure out what application generated this traffic.thanks.Chris

When I want to setup BGP regular expressions I read the command is"IP AS-PATH ACCESS-LIST".Is this the only command/verb syntax under BGP that will allow regular expressions?Thanks

Cisco used to have the tftp software on their website. I can't seem to find it anymore. Anyone know where I can find it?Thanks.

How many entries of each type of community string i.e. ro, rw and 'rw all' do the following Catalyst switches support:650040034006450345064507Does hybrid or native mode affect this for the 6500?

Is it possible configure differents privilege exec levels on Catalyst 4000 and 6000 as we do on routers or Catalyst 3548 ?How could I configure differents access level password?Thanks for the help.

Good Morning all,I am not understanding the reasons for the following information.In the Cisco Web sites I have find the following statement:" In some cases, fast switching is inappropriate, such as when slow-speed serial links (64K and below) are b...

Does anyone know the memory requirements for BGP on a 7507?

I am attempting to set up Cookie Sticky's on a CSS11150, and am having no luck. I have entered the commands into my https content rule like thisadd service tuxsw1add service tuxsw2protocol tcpport 443vip address <not displayed>balance acaurl "/*"adv...

I currently use rme 2.2.I would like to download ios images with rme by selecting tasks>Add image to library but cisco HTTP server returns an error message "bad request" with an error code "400" at the time of the remote loading. After having che...