Other Network Architecture Subjects

I'm presently shaping a network with 15 routers. The network is all cisco with EIGRP running on all routers with VLSM enabled. I'm considering moving to OSPF on WAN links and EIGRP on LAN. Routers are 2600 series and core is a 2948GL3. Network is pre...

Catalyst C2924M-XL switch supports WS-X2951-XL ATM Module.It also supports ISL links.Does it support bridging between PVC (corporate campus ATM network) and VLAN (which uses ISL)?

we have a cisco2621,ios is 12.2 or 12.0.7t,configuration is as follows:interface FastEthernet0/0 ip address 82.0.0.1 255.255.255.0 no ip directed-broadcast duplex auto no sh speed auto£¡router eigrp 100 network 82.0.0.0 no auto-summary !ip route 1.0....

I have the following command in our OSPF process: redistribute static subnets route-map staticI also have the global configuration: route-map static permit 10match ip address 110Question if there is no access list 10 or 110, what is the resulting eff...

Is there like a data sheet that has the meaning of all syslogs that are produced by the router and switches.

I have a catalyst 5500 running CatOS 4.4 connecting to 2924 switches running IOS 11.2 using 100FX modules and configured for VLAN trunking.Everything is functioning as expected except that I notice giants on the 2924 100FX interfaces and flashing amb...

Hello Could you please tell how i could get the syslog from rsm, cat 2950 and 3548 to our nms-station. It seems that those devices send syslogs to udp port 514 and our nms-station listens only udp 162.rsm does not have snmp-server enable traps syslog...

Greetings,I have not been able to find a definitive solution to this query anywhere. Can a 1750 failover on it's own interfaces? Ie - ISDN or Serial link to ISP on Interface A and ADSL Link to ISP on Interface B. If the default ISDN link goes dow...

hallo,.................I'm a new comer in this site,...............i hope it will be usefull for me,.....thanks

Catalyst 6006 standalone with no connection need to be tested weather it's faulty or ok. When I reboot it has Orange Status light ON all time I remove and put all module but still has same problem. I am trying to Break the password with Break+Cntrl, ...

I have a result of "sh log" command on Cat6509, but I can't find the correspond reference for the result.Where the reference is?

helloi have a cat 6506 layer 3 switch with Gbps ports (optical fiber): no 10/100/1000 RJ45.i connect this switch with a HP4000M (layer 2 switch) using one of the OF port.i created many layer 2 VLAN in the HP4000M and use the tagging between the 2 swi...

Anyone know the exact spec for the cable between the BRI and the NT1 ? Is it just plain old Cat5 ?

Network Diagraminternet------s0-[2611]-e0------LANLeased line 1Mbps to Internet,i try to distribute bandwidth to different application.example,ftp can use max 400Kbps.yesterday,i try to use Class-Based Weighted Fair Queueing do it ,but it only attac...

Ask a stupid question - now Catalyst 4006 with S3 can support 64G switch backbone, 48 Mpps L3 forwarding. While Catalyst 6509 default with MSFC2, PFC2 support only 32G switch backbone, 15 Mpps forwarding rate.Why shall we select Catalyst 6509?