Other Network Architecture Subjects

We have configured an ISDN BRI port on a 1600 series router to call another ISDN BRI port using dialer profile. The ISDN Link comes up and goes down many times per second. This can be seen in Debug. When we use Debug ISDN q931 we get the "Cause i=0x8...

Hi all,I have a Cisco Catalyst 1900 series switch (WS-C1900), 24-port 10BaseT plus 2-Port 100BaseTX. It is currentl running firmware v5.37, standard edition software. Is it possible for it to be upgrded to the latest firmware v9.00.04?I have tried to...

i have one 2621 (2 ethernet port) router , we have t separate ip network(netA)192.168.1.0 and (netB)192.168.2.0 . i want user of netA can ping to netB user through above router. router Fastethernet 0/0 is 192.168.1.1 255.255.255.0Fastethernet 0/1 is...

I have a 3640 router. I noticed that the fast ethernet interface has input queue drops for packets that are being forwarded through the router.Are the input queue drops anything to be concerned about? If so, what can be done to prevent them. I cannot...

I am useing Cisco Works 2000 4th Edition with solaris 7,these days i found that i can't use cisco viewwhile i open cisco view , it pop me the noticePlease grant permission to launch Cisco View . Quit the browser and try againi have the CD 1 reinstall...

In have a dual homed 2620 router with two different isp connections, each with its own address block. I probably cannot do BGP. I will be doing NAT over each outbound interface using addresses from that particular ISPs address block.What degree of ...

When creating a span session or changing the properties of an existing span, the 4006 restarts. Is this expected behavior?

Hello,I'm looking for information about how I can backup our LMS 1.1 server, without having to stop services and/or reboot the server. Our backup software cannot obtain a lock on the database, and other files that are in use by RME, CWSI, NetScout, a...

Hello,I have a 3660 router with 6 connected E1. (3 NM-2CE1U).When E1, connected to controller 1/0 goes down (shutdown on remote end), I started to loose packets on E1, connected to controller 1/1.All controllers are configured equally:controller E1 1...

I have to design a networking topology etc for 5 schools in the county I live in. I am in a Computer Tech class and designing the network is for our last six weeks grade. If anyone can offer help, I would be extremely grateful. It must have a full...

I have 2 G4908XL switches that are aggregates for 12 3548XL stacks. I have 15 VLANs configured other than VLAN1. VLAN1 has an address range of 172.16.0.0/20. Each VLAN has an address range of 10.2.4.0/23, 10.2.8.0/23, 10.2.12.0/23....on and on. W...

Hai all, I am need of Cisco CGS DB-25 to V.35 interface serial cable specifications. If anybody knows, please give me the specifications.I have searched "Cisco" web site, but couldn't find it out.Thanks in advance...Regards...--Ashok.

Is it possible to configure a 2621 router to forward packets from a LAN connected to fastethernet0/0 to a proxy server connected to fastethernet0/1 using port 1111 as the proxy port? Can you set up the router to act as a proxy client like that?

Is there a way to set 2 different values of BW on a FRSM port on a MGX 8850, so that the Egress value is less than the ingress value, i tried both cnfchanpool and xcnfchan with no luck as they alyways assume i'm oversubscribing the egress value not t...

We have an AS5300 (12.2 IOS) with mica modems and a PRI. We are using DialOut/EZ for outbound modem connections. Everything is working fine for local numbers, but we are having a problem with long distance. Our company has it setup through our telco ...