We just received our 3005 today. We are running 3.6.7 and noticed that by default all management protocols are enabled by default on both interfaces. Is there a way I can shut down the external so it is only manageable from the internal??Thanks
I am having problems getting raduis win2k to work with the 3005. I set the authentication server and was able to get authentication successfull, but when I set an Exteranl group I am getting erros. If I look in the event log its trying to authenticat...
On the new Update-URL : http://www.cisco.com/kobayashi/sw-center/ciscosecure/ids/crypto/there is mentioned (for the first time that I´ve seen) s/w-upgrades for the EventViewer (IEV). There is an EventViewer 4.0 which replaces 3.1Is this IEV-version ...
My apologies if this was asked already and I didn't see it. I see that the consoles have S41 and S42 updates now but the IDS sensor updates haven't come out yet. Any eta on this? Has the download page changed?Thanks in advance.
Hello,We just starting running into an issue where if we go into administer sessions and try to ping a client it will come back as unreachable. We use split tunneling and have an internal network list for the clients. What we have to do is first have...
I have installed vpnclient 3.6.3(B) and vpn 3030 concentrator.I have created a microsoft certificate but, when i try to connect to the concentrator or validate certificate from vpnclient the message that appears is 'The certificate cannot be validate...
Folks,On two sites our 6500 switches are running Cisco IOS. As far as I know 6500 switch provides server load balancing (SLB) for application failover.Question: Is there any advantage (regarding failover / load balancing) if we migrate from IOS to C...
I have a system that we have to install for the police department called LOCATER. This is something similar to the "Amber Alert" system now in use in many states. They are requiring that that ports 25, 80, 110, 389 be open to address 208.254.21.15...
we have two cisco vpn concentrator's (3005).Behind one we use 172.20.167.0/24 (headquarters office)Behind one we use 172.20.184.0/24 (remote office)we are attemping to do a lan-to-lan tunnel, the tunnel establishes no problem,the only problem is I ca...
following design is givenVPN3005(central)---Tunnel-------PIX506(remote) network-extension-mode&RRI A VPN Client (PC) connects to VPN3005 and wants to reach server on PIX506 site over the tunnel from 3005 to PIX506.At same time Users on LAN Pix506 wan...
I want to be pages and emailed if a change (such as rules change) is done on my firewall. I haven't been able to find any documentation on this .Would logging informational to the syslog and then have the syslog email/page me from there? or is there...
Ive noticed when configuring the remote hosts area of a sensor via the VMS 2.1 MC that it sets the event destination levels to all. There is no place to specify either alarms, commands, errors, ip logs, as is the case in the config files and the IDM....
