Other Security Subjects

IDS appliance not comunicate with the Event Viewer Agent on W2000 the error is " csids1.hal Connection 1: 192.168.1.201 45000 1 ( SynSent ) sto:5000 syn Noyt rcvd! "I have already verify all the configuration paramiter , and all is ok .Why not comuni...

Hello,is there general suggestion how to set up WIN2000 Domain Controler in relation to firewall?Thanks,GB

Is it possible for a VPN3030 concentrator to use both Public and External Interfaces to connect different ISPs for each? My customer is currently using a VPN3030 to connect the Internet via an ISP with it's Public interface for Remote Access and LAN-...

Is there a way to log in to the IDSM and add filters for signatures to it directly just like it is done for the IDS42XX sensors? Thanks in advance.

I'm using your figure 12-3 example on page 320 in a lab and get this error : Reaper overriding refCnt and TunnelCnt deleting SA trying to ping from Pix2 to SIte 1I can't ping from Site 1 to Site 2. I can ping from C1 to Site 2.ThanksEric

Setup: 1605 running 12.0(5)T with IPFW w/ NAT(PAT) with one public on e0 and one private on e1.I have turned off service dhcp and made sure no databases were define and no ip helper-address enabled, but everytime I scan the public side with nmap UPD ...

I have CW2K managing 125 devices in our net with default community strings.I want to change them for security reasons. I want to use Net Config in RME tomanage the process. What should the change process flow be?

Having trouble with users authenticating, log shows:74 07/12/2002 11:23:51.550 SEV=5 AUTH/44 RPT=1 Unexpected SDI status value: 2375 07/12/2002 11:23:51.550 SEV=4 AUTH/15 RPT=38 Server name = x.x.x.5, type = SDI,group = XXXX, status = Not-in-serviceA...

Dear friends, We are using an external router (Cisco 1751) with the IOS Firewall. As logging facility, we use a central sever which receives log from ACLs, Inspect Lists and IDS module configured in this router. Frequently we can observe a message wi...

Is it possible for a VPN3030 concentrator to use both Public and External Interfaces to connect different ISPs for each?My customer is currently using a VPN3030 to connect the Internet via an ISP with it's Public interface for Remote Access and LAN-t...

I am trying to add my sensor to director and getting the erro no sesnor responding at Host ID: 30 Org ID 100 warning.Sensor version 2.5(0)S0 CSPM 2.3.0When I use nrconns it is giving the following error45000 1 [synsent] sto 5000 syn Not rcvd!nrstatus...

Hello, the free 3Com syslogd is running on NT server, it logs the messages from cisco routers. But the messages from cisco routers are combined in only one line with no separation. Appreciate someone could provide the solution to change it to separat...

im configuring a simple lan ( 1 switch)and using 1605r with isdn card for intnt and email. are there any lines of config to disconnect the router from intnt or will it auto disconnect without any traffic. (eg. close intnt xplr and outlook)many tha...

I have 2 questions. firstly, I am using a static map to forward the packets from DMZ to inside network. Is there any other way to do this ?Secondly , Can i use static NAT to 2 IP address from the inside network to Single IP address in the DMZ network...

I do a show version and I don't see the amount of flash.We have 4.4 which according to Cisco is 20mb of flash...but I have found their documentation cannot always be trusted.I need to upgrade to 6.2 but definitely need 20mb. Is there a hidden comman...