I have CW2K managing 125 devices in our net with default community strings.I want to change them for security reasons. I want to use Net Config in RME tomanage the process. What should the change process flow be?
Having trouble with users authenticating, log shows:74 07/12/2002 11:23:51.550 SEV=5 AUTH/44 RPT=1 Unexpected SDI status value: 2375 07/12/2002 11:23:51.550 SEV=4 AUTH/15 RPT=38 Server name = x.x.x.5, type = SDI,group = XXXX, status = Not-in-serviceA...
Dear friends, We are using an external router (Cisco 1751) with the IOS Firewall. As logging facility, we use a central sever which receives log from ACLs, Inspect Lists and IDS module configured in this router. Frequently we can observe a message wi...
Is it possible for a VPN3030 concentrator to use both Public and External Interfaces to connect different ISPs for each?My customer is currently using a VPN3030 to connect the Internet via an ISP with it's Public interface for Remote Access and LAN-t...
I am trying to add my sensor to director and getting the erro no sesnor responding at Host ID: 30 Org ID 100 warning.Sensor version 2.5(0)S0 CSPM 2.3.0When I use nrconns it is giving the following error45000 1 [synsent] sto 5000 syn Not rcvd!nrstatus...
Hello, the free 3Com syslogd is running on NT server, it logs the messages from cisco routers. But the messages from cisco routers are combined in only one line with no separation. Appreciate someone could provide the solution to change it to separat...
im configuring a simple lan ( 1 switch)and using 1605r with isdn card for intnt and email. are there any lines of config to disconnect the router from intnt or will it auto disconnect without any traffic. (eg. close intnt xplr and outlook)many tha...
I have 2 questions. firstly, I am using a static map to forward the packets from DMZ to inside network. Is there any other way to do this ?Secondly , Can i use static NAT to 2 IP address from the inside network to Single IP address in the DMZ network...
I do a show version and I don't see the amount of flash.We have 4.4 which according to Cisco is 20mb of flash...but I have found their documentation cannot always be trusted.I need to upgrade to 6.2 but definitely need 20mb. Is there a hidden comman...
I found this message below and I'm having the same problem when converting from conduits to access-lists on the PIX. My config is the same: dmz hosts need to access hosts on the inside via a static translation on the dmz. The access-list forced me ...
Hello,I'm using EasyACS 2.4 on windows NT 4.0.I'm searching for a way to get logged-in users list on a personnel web page, exactly an asp or html, without using the EasyACS web interface.Can some one have an idea ?Thanks.Fethi.
Is there any way to configure the AS5300 to disconnect ppp connections already established if there is appropriate attribute concerning login-timeouts set in the Radius server.Any help would be appreciated
Is the NSDB database available online? I currently get e-mail from my IDS Systems (NetRangers) and in the e-mail I get the SIGID# and SUBSIGID#. However, I would like to be able to look at the NSDB from my desktop. I know that one solution is to inst...
We found a significant volume of out-discards for the SPAN ports of some of our 4230 sensors. The ports are 100 Mbps full duplex. Does it mean that the sensor cannot keep up with the traffic, and is there anything we should do to fix it? I did not...
