Is there a way to alloww read-only access to only a portion of the config. I have customers who are requesting read-only access, but i don't want them seeing portions of the config. Any help or suggestions would be greatly appreciated. Thanks
Is there a way to alloww read-only access to only a portion of the config. I have customers who are requesting read-only access, but i don't want them seeing portions of the config. Any help or suggestions would be greatly appreciated. Thanks
HiI have the following problem: On a Cisco 2951, IOS 15.1(3)T, if I manually configure on a host behind my lan interface an ip address for a different network, I get an ip address conflict message and the mac address that conflicts with my computer b...
Hi, I have bought and installed a 2048bit certificate from Thawte on a ACE20-MOD-K9 module. The appliance can't use it and gives the following error: "This certificate cannot be verified up to a trusted certfication authority."I have contacted Thawte...
Hi Everyone.I have gone through CSC-SSM product data sheet at http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/ps6823/product_data_sheet0900aecd80402e4f.html.In the product licensing it sai CSC-SSM 20 supports max 1000 users. ...
Is it possible to generate CSR using SH1 instead of md5 on Cisco 1841 for SSL VPN, because the provider that I try to use doesn't accept md5. Also tried to import there private key and got an error "Error: invalid PEM boundary" any help would be appr...
hiOne of my client want to upgrade its already installed ASA5540-bun-k9 by adding CSC-20 Module. As per below link CSC-20 is supported with ASA5540. but for any reason the ASA5540 bundle option with CSC Module is not available that create confusion....
Hello everybody,I'm quite new to this community so forgive me if I intrude or if i'm doing something wrong. I'm a young network enthousiast and I'd love to explore a career in Network Security.i'm currently doing a school project that includes router...
Hello,With the ASA 8.0 software version, we've noticed that every time we reboot tha appliance, the config line:no crypto isakmp nat-traversalappears in the configuration.This is very annoying, because with this the NAT-T obviously doesn't work.Someo...
HiI have requirement received from one of my customer. the part number given as ASA5540-AIP40-K8, same time requesting for addition of another 4Port GE Module (i believe its SSM-4GE Module). Is any option to add this module in to the above specified ...
When I'm accessing information on the MARS via. web interface, the console starts complaining about temperature.Message from syslogd@corpmars01 at Mon Dec 12 13:19:37 2011 ...corpmars01 kernel: CPU0: Temperature above thresholdMessage from syslogd@co...
Hi,would like to hear if someone have experienced that one of the HA CS pair routers has broken down in pieces and got replaced with a new one?I'm expecting to fire up new router and perform the following steps in order to restore the HA state:1. Con...
Hi,Could anybody please comment whether Cisco VMS has Command Line support?I want to invoke the system through command prompt with the camera configuration file (prepared once) as an arguement.Thanks,Sanjay.
I have a Cisco 7200 acting as the DHCP relay agent on my network. From a security standpoint, I want to disable the bootp server, with 'no ip bootp server'. What bearing, if any, does 'no ip bootp server' have on DHCP activity?
Hi all,How can I verify the status of the small services (finger, tcp-small-servers, etc) without of using the "show running-config" command? What do other "show" commands exist for verify the status of the small services?Thank you in advance,Fedor
Hi folks,I'm currently investigating an issue for one of our customers where one of their 3750 Core Switch Stacks crash / becomes unresponsive during a NESSUS Scan.They've diabled DoS testing and have ensured that safe scanning is enabled. For the t...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-05-2024 02:02 AM | ||
06-27-2024 07:55 AM | ||
06-25-2024 12:23 PM | ||
06-06-2024 05:38 AM | ||
05-28-2024 10:56 PM |