Hello,In the configuration file of a firewall ASA5510, the password are encrypted.Do you know the kind of encryption used?Thanks for your help.Best regards
Hello,I have a Cisco 871 router and I'm trying to allow only specific MAC addresses to access the network. Is there a way to specify that only specific MAC addresses are allowed access? Any other MAC's will be denied access?I can either do static IPs...
Hello All- I am including the output from our companies ASA 5520. I am wondering if this strange output could be due to ARP Spoofing, and if so what should be my next step?WRMC-ASA# show arp outside 24.XXX.XX.XX 0002.fc67.8166 64 - (This ...
Hello,I'm wondering if somebody has ever experienced the same problem and can share some comments. The arp table on our 2811 was growing up with entries mapping various IPs to the same MAC address. We got up to 20 entries with this kind of mapping. 5...
I try to setup a CS-Mars to AAA Cisco ACSI setup the mars to RADIUS(Cisco VPN 3000/ASA/PIX 7.x+) with shared secret 1234Cisco ACS hostname: cis04ba1CS-Mars hostname: mars01ba1I got this error logs in Failed Attempts Date TimeMessage-TypeUser-NameGrou...
Hi:I'been trying to run the cisco SDM application, but when you enter the username and password in the second window show up this : I tried with diferent versions of java jre from 1.4.2 to the latest.<!---
*
* runAPP.shtml
*
* Copyright (c) 2004...
There are around 500 users and all are having non admin rights on their computers. When the software is download from the cas to the users pc it says that the software cannot be installaed as the user does not have admin rights. so each time we have ...
Hello,Just wanted to know is there any way to turn on additional logging on CAS let's say? I have enabled logging on CAM, it sends to local syslog daemon which is really useful. In this log I can see what is going on after agent is downloaded.I'd lik...
Hi All,I've added managed network in CAS with the wrong vlan and the communication is broken to the CAS. I can't ping it anymore and can't add it to the CAM. I've added trusted subnet with untrusted vlan as managed network. How can I delete this conf...
Hi,Based on http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/device/configuration/guide/cfgHost.html configuration, if inetd file has been upgraded to xinetd, then how to configure xinetd file to write to the system log, there...
I have a vendor that monitors some firewalls remotely, and with that, the MARS is always firing the alert "System Rule: Modify Network Config" because of the "Firewall user entered a command other than show" rule. I'd like to tune either their IP or ...
Hi All, Can you help me on this? Web Agent is needed to download the CCA isn't it? I cannot access my CAS Web Agent through my CAS's management IP. The webpage cannot be found displays on the screen and shows HTTP 400 Bad Request error. A...
We have a core switch with FWSM. All the users Default gateway is FWSM.There is an access switch where the user is connected. The mode ofdeployment for NAC is L2 OOB VGW. The switch is added to the Nac. ADSSO is configured on the nac and the service ...
So I'm reading on other discussion threads that cisco is not going to be supporting non-cisco devices moving forward. Can we get any confirmation on the timeline for this?
I am trying to clean up the access-lists in an ASA firewall. Due to the amount of traffic that goes though it, I have been having trouble getting a list of traffic that is actually travelling though the ASA.I have been looking at the new Netflow fea...
