Other Security Subjects

Hi friends, Can 3020 model support both load-balancing and High-Availability??Regards at same time?

We have remote offices using EZvpn on PIX 506e to connect to corporate.To prevent tunnel to go down we had to use the command "vpnclient nem-st-autoconnect"We are now trying to replace the 506e with an IOS router.What is the command equivalent on IOS...

i have a PIX 515 and am using smartfilter to filter traffic from my LAN to the Internet, and the DMZ. When users are trying to access web server on my DMZ, it is noticeably slow. As soon as I turn the filtering off it moves fast like it is on the ...

I am trying to find more info about using a Citrix farm through an ISR Web VPN.I can not find a lot of documentation about it or any example config.My main question is: What is the user's experence like. Are they presented with a Java session only? O...

Why does the nat ID differ. What is the significance of nat 10, 30 because there is no groups insdie for 10,30nat (inside) 0 0.0.0.0 0.0.0.0global (outside) 10 interfaceglobal (outside) 30 53.247.147.52 netmask 255.255.255.255

I've been spinning my wheels for the past week trying to get this to work.My Goal: To have users switched back to their initial vlan after successful authentication/remediation.I was able to get this to work in the lab with a single vlan. I had a 1:...

Folks, I have choosen noisy install for CSA 5.1 agent, but i still do not see the network shim option???I would also like to disable security options on the agent, can someone help me with these 2 questions please.

Is there any plans to extend the ACE Limitation for single mode and multiple mode on a FWSM from 80 K (single mode) or 142 K (multiple mode)? and is this a shared medium for all virtual firewalls...or is it per context? and if it is shared, how do yo...

Hello,This is my first installation of Cisco Security Manager 3.0 on MS Windows 2003 R2 Enterprise Edition and I was wondering whether anyone experienced, or have any suggestion/idea on my system's high cpu utilization - I haven't add any cisco host ...

For some reason when my users connect remotely using VPN to servers inside I get an error in the log like the following: <162>Mar 14 2006 07:44:47: %ASA-2-106001: Inbound TCP connection denied from 192.168.1.6/524 to 192.168.1.209/1116 flags RST ACK ...

I have a DMZ that has DHCP configured with a range of 25 addresses. There are laptops that connect to wireless in the DMZ which have Integrity Agent installed on them, and are trying to contact an Integrity server located on the inside using port 50...

Sorry I'm new to all this but how do I enable my Pix-525 V7.0 to allow traceroute so I can see if my packets are going over the Pix? Thank you in adavance