Other Security Subjects

Has anyone had problems with using AutoCAD LT2002 once Cisco Security Agent (CSA) has been installed to PC/laptop ie LT2002 will not start and comes up with memory error message. Only way round this so far as know is to remove CSA.Any help would be m...

hi all,LAN1--R1----Internet----R2---LAN2LAN1 and LAN2 communicate over the IPSec tunnel, crypto map applied under the interface connected with internet, after apply the crypto map, I can not telnet the router, how to solve the problem?Thanks

I left an 837 on site with a view to configuring it later. Now I am back at the office I want to configure it. When I telnet in, it asks me for username and password. Anyone know what the defaults are for an 837

i am studying severall offers to buy a new entripreies CISCO based network. some offers suggest me to use CISCO Router 2821XM /3700 series. both containes firwall with IOS. my question: what is the main technical differences between using the firewal...

Does Cisco have product that can stop a machine or many machines from INSIDE the network from producing a SYN FLOOD situation ONTO the ISP network?

We want to put a router in a unsecured area. I have configured the switch for port-security so only valid mac-addresses can use the network and I have disabled password-recovery on the router. How can I stop someone plugging directly into the router...

Hi!I'm trying to setup LAN-to-LAN IPSec tunnel from remote office VPN3k concentrator to the central site with two VPN3k concentrators connected to different ISPs. The remote office L2L tunnel is defined as "Originate-only" and two IP addresses of cen...

I want to implement a DMVPN but my spoke routers are SOHO series running 12.3(8)T3 and it seems like none of the images available support NHRP.Are there any alternatives that would allow mGRE with IPSec?Any idea if NHRP will be included in a future r...

Happy Holidays everyoneI'm in the process of migration from a pix 535 to the FWSM. The pix uses conduits and the FWSM uses ACLs. I've moved the format but have found an issuewith access from the DMZ to the inside interface. Isthere something I'm miss...

I am using a pix 501 6.3(1) withfixup protocol sip 5060fixup protocol sip udp 5060The pix is doing nat/pat on the inside sip pbx. When calling a sip phone on another network, the fixup works just fine and privatePbxIp is replaced with with publicPbxI...

Hi,I have installed PDM 3.2. Once i have logged in into the PIX via PDM it has added so many enteries of my local and remote networks into the PDM database.I want to access the PIX via PDM from particular hosts only.I removed all the enteries manuall...