Other Security Subjects

When trying to connect to a Cisco VPN Concentrator (Tax dept) with the Cisco VPN Client Rel 4.0.5. We get the following reason 414: Failed to establish a TCP connection. Now in looking up the reason it document ID 48160 states this may be due to usi...

How to one host in inside interface acess on server in inside interface but in your public public, this ip is configurated in static list.static (inside,outside) tcp 2.2.1.1 www 1.1.0.1 www netmask 255.255.255.255 0 0

I am a web developer who until now has had the luxury of having very knowledgeable network experts to configure the hardware for the web sites that I develop.I am building an ASP.NET web site and I would like to know what kind of hardware (firewall, ...

I have a sensor appliance with the latest release. Now, I want to administer it in snmp. Is it possible to congifure that in the sensor (I didn't find anything), or must I use a software like IDS directorI don't use VMS.I have solaris.

I am getting ERROR: invalid nat ID, <2>, with access-listwhen I am trying to enter nat (inside) 2 access-list acl-nameI am also getting invalid local IP address access-listWhen I try to enter the static Policy NAT command: static (ins...

I am looking to upgrade my PIX 520. I know that to upgrade to PIX OS ver 6.3 I need 8 MB flash, but when I run "show version" to check what my firewall has I get the following:------------------------------PIX Version 4.2(5)Compiled on Tue 27-Jul-99 ...

Will Pix Version 7.0 include or support zone to zone acls based on the default behavior of interface priority? Example: An access-list would be required for traffic originating from the dmz to inside, but would not be required for traffic originating...

Does anyone know (other than changing the IP addr) what is required when moving an IDS from one network to another?

I'm using pix 515E and i'm running into problems with static mappings/access-listinterface configsinterface outside 210.6.160.162 255.255.255.240 security0interface inside 172.25.30.1 255.255.255.128 security100global configsnat (inside) 1 0.0globa...

Good morning,I have a PIX 515, 6.2(2) and would like to be able to pull the syslog to a snmp management device. Can someone give me some pointers?TIA,Chris

Hi, I'm trying to create a new LAN-to-Lan connection on my VPN 3000 concentrator. When adding this connection, I receive the following error message : A Peer may not have more than one LAN-to-LAN Connection. What did I do wrong ? What does this mean ...

Hi All,I have two difference WAN link (E1 & ADSL) with two difference subnet of Public IP Address (203.117.144.xxx & 203.118.40.xxx). How should I configure the PIX link to two routers and also direct the internal network traffic to the proper WAN li...

Hello EverybodyFrom Internet HTTP an SMTP works but HTTPs and some other Port with Static NAT doesn't?(IPT removed)!c1700-k9o3sv8y7-mz.123-8.T.binno service padservice tcp-keepalives-inservice tcp-keepalives-outhostname cisco1760mmi polling-interval ...

Please help, I have a client with a PIX 506e which I setup and have outbound NAT setup and the vpn working. I am having difficulty figuring out how to allow my internal services access through the wan port. To explain, I have a web and smtp server on...